Operations; Built-In Viewer Operations - JVC VN-H37U Instructions Manual

Operations

Built-in Viewer Operations

The camera has the Built-in Viewer.
Enter the IP address of camera in the address bar of Internet Explorer. The Built-in Viewer allows
H.264/JPEG/MPEG-4 data monitoring and digital PTZ operations.
When you are using the JPEG data compression, you can display a series of still images and record
still images.
You can operate PTZ (Pan, Tilt, Zoom) function using a mouse.
● If you click the mouse on the screen, the clicked spot will be the center of the display area.
● You can manipulate zooming by rotating the mouse wheel.
Memo:
● The first time you display the Built-in Viewer in Internet Explorer, the viewer will be installed on the
computer.
Screen Configuration (APage 88)
Picture Quality Setting (APage 90)
PTZ Settings (APage 93)
PTZ Control (APage 95)
Unicast Settings (APage 97)
If the display or configuration of the open window appears strange, check the PC settings as
follows:
A
Select [Start] - [Control Panel] - [Appearance and Personalization]
B
Select [Display] - [Adjust screen resolution]
C
Check that [Resolution] is set to [Monitor size (recommended)].
D
Otherwise, change the setting to [Monitor size (recommended)] and press the [OK] button.
E
In [Display Settings], press the [Keep changes] button.
Multicast Settings (APage 99)
On-Screen Display Settings (APage 101)
Other Setting (APage 107)
Exiting the Built-in Viewer (APage 108)
87