Adjust The Display Contrast; Edit Handset Name; Temporarily Show Or Hide Your Telephone Number; Direct Call - Silvercrest COCOON M1450 TWIN User Manual

Cocoon M1450 TWIN
– 'On': switches keypad beep on.
– 'Off': switches keypad beep off.
7. Press
2
without saving the setting.

4.18 Adjust the display contrast

1. Press 2
2. Press or
3
3. Press
2
4. Press 3 or
5. Press
2
6. Select the contrast (8 contrast levels) using
7. Press
2

4.19 Edit handset name

The procedure for changing the name of your handset shown in the display in standby mode
is as follows:
1. Press 2
2. Press 3 or
3. Press
2
4. Press 3 or
5. Press 2
6. Press
14
alphanumeric keys to enter a new name.
7. Press 'Save' 2 to set the new handset name.

4.20 Temporarily show or hide your telephone number

When you call someone, your telephone number will be shown at your corresponded phone.
When you have disabled this function permanent at your telephone provider side you can
temporarily show your number:
.
1. Press R 4
2. Press 3 or
3. Press
2
4. Dial the telephone number you want to call.
12
5. Press .
If you always show your number you can hide it temporarily:
.
1. Press R 4
2. Press or
3
3. Press
2
4. Dial the telephone number you want to call.
12
5. Press .

4.21 Direct Call

By setting a Direct Call number, the phone will automatically take the line by any key press
and dial out this number. This function is useful to use the phone as a emergency phone or
to prevent unauthorized use.
to confirm your selection or press
.
repeatedly, select 'Handset'.
11
to confirm.
repeatedly, select 'Contrast'.
11
to confirm.
to confirm your selection or press
.
repeatedly, select 'Handset'.
11
to confirm.
11 repeatedly, select 'Handset Name'.
to confirm.
repeatedly to delete the letters one after the other and use the
11 repeatedly, select 'Show Number'
to confirm.
repeatedly, select 'Hide Number'.
11
to confirm.
Handset - settings and operation
to quit the menu
14
3 or 11 .
14 to quit the menu.
21