PowerEdge M I/O Aggregator
Plug & Play
Easy Deployment
•
–
Simplified layer 2 connectivity (no spanning tree)
–
Faster Deployment: All VLANs on all ports with the option to set VLANs
–
No touch DCB and no touch FCoE
›
DCB and FCoE settings detected from top of rack switch through DCBx protocol
Simple GUI Integrated into Chassis Management Controller (CMC)
•
(Note: CMC GUI will not function if the IOA is stacked. IOA must be managed through CLI when stacked.
Maximum stacking capability is 2)
High Port Count:
•
–
32x 10GbE internal server ports
–
Up to 16 external 10GbE ports (4 QSFP+ ports with breakout cables)
Two FlexIO bays enable choice
•
–
2-port 40GbE QSFP+ module
–
4-port 10GbE SFP+ module
–
4-port 10GBASE-T module
(If running Base-T module then second IO slot must be of different type due to power
constraints)
–
4-port FC module
Converged
•
Supports DCB (protocols PFC, ETC and DCBx)
•
Converged iSCSI with EqualLogic and Compellent
•
Two FCoE Options
•
Native Fibre Channel uplinks with FC FlexIO module (FCoE on internal ports to the servers)
•
FCoE transit to top of rack switch with IOM acting as a FIP Snooping Bridge
•
Industry standard CLI. Standard troubleshooting commands via CLI
•
VLT up to 2 devices
•
Dell M-Series Blade I/O Guide
11
(converts to 8-port 10GbE SFP+ using breakout cables)
Converged
Two
FlexIO
Modules
Two
QSFP+
ports