Dell PowerEdge M1000e User Manual page 12

PowerEdge M I/O Aggregator
Adapters
11G
-Broadcom 57712-k
-Brocade BR1741M-k
-Intel X520-x/k
-QLogic QME8242-k
12G
-Broadcom 57810S-k
-Broadcom 57840S-k
-Brocade BR1741M-k
-Intel X520-x/k
-Qlogic QME8262-k
S
upports connectivity to 10Gb-KR
adapters, all of which are notated
with "-k." It does not provide
connectivity to legacy 10Gb-XAUI
NICs/CNAs
If connected to 1Gb Ethernet
Mezzanine cards or LOMs, device
will auto-negotiate individual
internal ports to 1Gb.
More details in
Adapter Portfolio section
Designed for I/O bays
A 1 /A 2
B 1 /B 2
C 1 /C 2
Dell M-Series Blade I/O Guide
12
FlexIO modules do not have to be the same
4 port SFP+ Module
4 port 10GBASE-T Module
Limited to only one 10GBASE-
T module . The other module
bay can be populated
4 port FC Module
2 port QSFP+
Module
Two integrated QSFP+ ports
All QSFP+ ports and modules for this
device are fixed in 4x10Gb breakout mode
Secondary Management Serial Port
(Cable included)
USB Port
Converged
Optical Transceivers
SFP+ 10Gb: SR, LR
SFP 1GbE: SX, LX
SFP to RJ45 converter
1000Base-T (only capable of 1Gbps)
SFP+ Direct Attach Cable (Twinax)
(0.5m, 1m, 2m, 3m, 5m, 7m available)
Can operate at 10Gb and 1Gb
RJ45 / Cat6a Copper
10Gb/1Gb
(supports auto-negotiation)
Optical Transceivers
SFP+ 8Gbps (will connect at 4/2 Gbps)
SW 150m, LW 4km
QSFP+ to 4xSFP+ Breakout Cables
5m Passive Copper
40GBASE-CR4 10Gb
QSFP+ to QSFP+ Direct Attach
1m, and 5m, Passive Copper
40GBASE-CR4 40Gb
Optical Transceivers
SFP+ 40Gb: SR only
QSFP+ to QSFP+
Fiber Cables
QSFP+ to 4xSFP+ Fiber
Breakout Cables