System Requirements - Sharp PN-K322B Operation Manual

nTouch Panel
To use the touch panel, the monitor must be connected to a computer using a USB cable.
Touch panel operating conditions are as described below.
Computer
OS
• Windows 7 or later is recommended for touch action.
• On Windows 7 and later, the touch panel operates with the standard Window driver. On Windows Vista/XP, you must install
the touch panel driver to your PC from the supplied CD-ROM.
n Pen Software
Operating conditions for the supplied Pen Software are as described below. To install Pen Software, refer to the Pen Software
Operation Manual. Pen Software is for use with monitors installed in landscape orientation.
Computer
OS
Free space on hard drive

System Requirements

PC/AT compatible computer with a USB 1.1 port.
Windows 8 (32-bit or 64-bit version), Windows 7 (32-bit or 64-bit version), Windows Vista (32-bit or
64-bit version), Windows XP (32-bit or 64-bit version)
PC/AT compatible computer able to output a resolution of 3840 x 2160.
(CD-ROM drive required for software installation.)
Windows 8 (32-bit or 64-bit version), Windows 7 (32-bit or 64-bit version)
At least 100 MB (free space separately required for data storage)
9
E