Getting Started; Switching Simpad On For The First Time - Siemens SIMpad SL4 User Manual

Getting started

Before operating your SIMpad for the first time, it is vital that you read the
Safety Precautions on Page 2!

Switching SIMpad on for the first time

Connecting to the power supply
Use the power adapter supplied. The small plug is plugged into the
appropriate socket at the back of the device (indicated by arrow).
Rear of the device
Before switching the SIMpad on for the first time its batteries
must be charged for at least one hour by connecting the SIMpad
to the mains. Charging begins when the AC/DC adapter is
connected to both the SIMpad and power socket. Leave the
SIMpad connected to the mains during setup.
AC/DC adapter
Getting started
9