Auto Search Camera - D-Link Mydlink DNR-322L User Manual

Section 3 - Configuration
Please connect your network camera(s) to network and power on them.
NVR will search your available camera(s) in the local network (LAN) and add them to the NVR List in the NVR automatically.
NVR will use default login ID: admin and blank password to add new camera(s).
If there are camera(s) found, NVR will start manual recording at the last step.
Note:
If you have existing camera(s) with different ID and password, NVR will add the camera(s) but not able to connect and record.
You can change the settings in the NVR Setup page.
Click Exit Wizard to finish the auto search.
Type admin for the username and
leave the password field blank.
D-Link DNR-322L User Manual

Auto Search Camera

Click Login
29