Choosing Installation Site - Electrolux SBB800T-1 Installation Manual

5.

Choosing Installation Site

to the area adjacent to the appliance or to the lower oors of the structure. When such locations
cannot be avoided, it is recommended that a suitable drain pan, adequately drained, be installed
under the appliance. The pan must not restrict combustion air ow.
Locate the vent terminal so that there are no obstacles around the termination and so that exhaust
can't accumulate. Do not enclose the termination with corrugated metal or other materials.
benzene and adhesives are handled, or places in which corrosive gases
(ammonia, chlorine, sulfur, ethylene compounds, acids) are present.
device fan to drop and incomplete combustion to occur as a result.
(e.g., hair spray or spray detergent) are used.
Ignition failures and malfunction may occur as a result.
mobile home, recreational vehicle or on a boat.
outdoors or in a bathroom, it may be damaged or a re may be caused.
Install the water heater in an area that allows for the proper clearances
to combustible and noncombustible construction. Consult the rating
plate on the appliance for proper clearances.
falling objects, such as under shelves.
pipes can be installed as directed.
walls or material not resistant to heat. Also consider the surrounding
trees and animals.
The heat and moisture from the water heater may cause discoloration
of walls and resinous materials, or corrosion of aluminum materials.
DANGER
WARNING
CAUTION
Prohibited
Prohibited