Servidor de impresion en placa ethernet multiprotocolo multifunction y servidor de impresion multifunction ethernet inalambrico (iee 802.11b/g) (128 pages)
Mac network connection repair instructions (2 pages)
Summary of Contents for Brother MFC-J615W
Page 1
BASIC USER’S GUIDE MFC-J615W MFC-J630W Version 0 CAN-ENG...
Page 2
Register your product on-line at http://www.brother.com/registration/ By registering your product with Brother, you will be recorded as the original owner of the product. Your registration with Brother: may serve as confirmation of the purchase date of your product should you lose your receipt;...
For technical help, you must call the country where you bought the machine. Calls must be made from within that country. Register your product By registering your product with Brother International Corporation, you will be recorded as the original owner of the product. Your registration with Brother: ...
If you cannot find the accessory you need and you have a Visa, MasterCard, Discover, or American Express credit card, you can order accessories directly from Brother. (You can visit us online for a complete selection of the Brother accessories and supplies that are available for purchase.) Note In Canada only Visa and MasterCard are accepted.
SOME STATES IN THE USA AND SOME PROVINCES IN CANADA. THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. IN NO EVENT WILL BROTHER'S LICENSOR(S) BE LIABLE TO YOU FOR ANY CONSEQUENTIAL, INCIDENTAL OR INDIRECT DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS...
Compilation and Publication Notice Under the supervision of Brother Industries, Ltd., this manual has been compiled and published, covering the latest product descriptions and specifications. The contents of this manual and the specifications of this product are subject to change without notice.
Page 7
LIMITED WARRANTY (Canada only) Pursuant to the limited warranty of 1 year from the date of purchase for labour and parts, Brother International Corporation (Canada) Ltd. (“Brother”), or its Authorized Service Centres, will repair or replace (at Brother's sole discretion) this MFC/Fax machine free of charge if defective in material or workmanship.
Page 8
Follow these instructions for Printing, Scanning, PDF file / ® Documentation Network Scanning, PhotoCapture Center CD-ROM Remote Setup, PC-Fax, and using the Brother ControlCenter utility. Network User's Guide This Guide provides more advanced PDF file / information for configuring the Ethernet and Documentation Wireless network connections.
Accessing the Advanced User’s Guide, Software User’s Guide and Network User’s Guide..................2 Viewing Documentation...................2 ® Accessing Brother Support (Windows )..............4 Accessing Brother Support (Macintosh) ..............5 Control panel overview ..................6 LCD screen......................8 Basic Operations .....................8 Loading paper Loading paper and other print media..............9 Loading envelopes and postcards ..............11...
Page 10
Multi-line connections (PBX) .................37 External and extension telephones..............38 Connecting an external or extension telephone ..........38 Using external and extension telephones............38 Using a non-Brother cordless external telephone .........39 Using remote codes..................39 Dialing and storing numbers How to dial ......................40 Manual dialing ....................40 Speed Dialing ....................40...
Page 11
® PhotoCapture Center : Printing photos from a memory card or USB Flash memory drive ® PhotoCapture Center operations............... 45 Using a memory card or USB Flash memory drive ........45 Getting started ..................... 46 Print Images......................48 View Photos....................48 ®...
Page 13
Table of Contents (ADVANCED USER’S GUIDE) The Advanced User's Guide explains the following features and operations. You can view the Advanced User's Guide on the Documentation CD-ROM. ® General setup PhotoCapture Center : Printing photos from a memory card or Memory storage USB Flash memory drive Volume Settings...
Using the WARNING documentation WARNING indicates a potentially hazardous situation which, if not avoided, Thank you for buying a Brother machine! could result in death or serious injuries. Reading the documentation will help you make the most of your machine. CAUTION...
Chapter 1 Accessing the Click your country. Advanced User’s Guide, Software User’s Guide and Network User’s Guide This Basic User’s Guide does not contain all the information about the machine such as how to use the advanced features for Fax, ®...
Page 17
Active X controls. download from For the page to display correctly you must http://nj.newsoft.com.tw/download/ click on the bar, click brother/PM7installer_BR_multilang.dmg Allow Blocked Content, then click Yes in the Security Warning dialog box. The complete Presto! PageManager ®...
Brother CreativeCenter. CD-ROM. To return to the Top Menu, click Back or Click Brother Support on the Top Menu. if you are finished, click Exit. The following screen will appear: To access our Web site (http://www.brother.com), click Brother Home Page.
The following screen will appear: To download and install Presto! PageManager, click Presto! PageManager. To register your machine from the Brother Product Register Page (http://www.brother.com/registration/), click On-Line Registration. For the latest news and product support information (http://solutions.brother.com/), click...
Chapter 1 Control panel overview The MFC-J615W and MFC-J630W have the same control panel keys. 1 1 0: 0:29 01.01. 01.01. 1.01.2010 Fax Mem. 1 Fax and telephone keys: 3 Menu keys: Redial/Pause Volume keys Redials the last 30 numbers called. It also...
General information 1 1 0:2 10:29 0:29 01.01.201 01.01.2010 1.01.2010 Fax Mem. 4 Start keys: 7 Dial Pad Use these keys to dial telephone and fax Black Start numbers and as a keyboard for entering information into the machine. Lets you start sending faxes or making (Canada only) The # key lets you temporarily copies in black &...
Chapter 1 LCD screen Basic Operations The LCD shows the current machine status The following steps show how to change a when the machine is idle. setting in the machine. In this example the Mode Timer setting is changed from 2 minutes to 30 seconds.
Loading paper Loading paper and With both hands, gently press and slide the paper side guides (1) and then the other print media paper length guide (2) to fit the paper size. Make sure that the triangular marks (3) Note on the paper side guides (1) and paper To print on Photo (4"...
Page 24
Chapter 2 Gently put the paper into the paper tray Note print side down and top edge in first. When you are using Legal size paper, Check that the paper is flat in the tray. press and hold the universal guide release Over filling the paper tray may cause button (1) as you slide out the front of the paper jams.
Loading paper Loading envelopes and Close the output paper tray cover. postcards About envelopes Use envelopes that weigh from 20 to 25 lb (80 to 95 g/m Some envelopes need margin settings to be set in the application. Make sure you do a test print first before printing many envelopes.
Page 26
Chapter 2 Loading envelopes and postcards Put envelopes or postcards in the paper tray with the address side down and the Before loading, press the corners and leading edge in first as shown in the sides of envelopes or postcards to make illustration.
Loading paper Loading photo paper If you have problems printing on envelopes with the flap on the short edge, try the following: Note Open the envelope flap. In Canada, the photo bypass tray is called the photo paper tray. Put the envelope into the paper tray with the address side down and the flap Use the photo bypass tray, which is located positioned as shown in the illustration.
Page 28
Chapter 2 Press and slide the paper side When you have finished printing photos guides (1) and paper length guide (2) to return the photo bypass tray to the fit the paper size. Normal printing position. If you do not, you will get No Paper Fed errors when you use Letter or Legal size paper.
Loading paper Removing small printouts IMPORTANT from the machine If you do not return the photo bypass tray to the Normal printing position after When the machine ejects small paper onto printing photos, you will get a the output paper tray cover you may not be No Paper Fed error when you use cut able to reach it.
Chapter 2 Printable area The printable area depends on the settings in the application you are using. The figures below show the unprintable areas on cut sheet paper and envelopes. The machine can print in the shaded areas of cut sheet paper only when the Borderless print feature is available and turned ®...
Press OK. Press d or c to choose Plain Paper, Inkjet Paper, Brother BP71, Press a or b to choose Paper Size. Brother BP61, Other Glossy or Transparency. Press d or c to choose Letter, Legal, Press OK. A4, A5, Executive and 4"x6".
(USA only) menu. (See Paper Type on page 17.) When you print on Brother Photo paper, load one extra sheet of the same photo paper in the paper tray. An extra sheet has been included in the paper package for this purpose.
Loading paper Handling and using print Paper capacity of the output paper tray cover media Up to 50 sheets of Letter, Legal or A4 20 lb Store paper in its original packaging, and (80 g/m ) paper. keep it sealed. Keep the paper flat and ...
Chapter 2 Choosing the right print media Paper type and size for each operation Paper Type Paper Size Usage Copy Photo Printer Capture 8 1/2 11 in. (215.9 279.4 mm) Yes Cut Sheet Letter 8.3 11.7 in. (210 297 mm) 8 1/2 ...
Page 35
For Photo 4" 6" paper and Photo L 3.5" 5" paper, use the photo bypass tray (in USA) or the photo paper tray (in Canada). (See Loading photo paper on page 13.) BP71 69 lb (260 g/m ) paper is especially designed for Brother inkjet machines.
Loading documents How to load Make sure documents with ink or correction fluid are completely dry. documents Unfold the ADF Document Output Support Flap (1). You can send a fax, make copies, and scan from the ADF (automatic document feeder) Fan the pages well.
Loading documents Scannable area How to load documents Note The scannable area depends on the settings in the application you are using. The figures To use the scanner glass, the ADF must below show unscannable areas. be empty. Lift the document cover. Using the document guidelines on the left and top, place the document face down in the upper left corner of the...
Sending a fax How to send a fax Set the scanner glass size, fax resolution or contrast if you want to change them. The following steps show how to send a fax. For more advanced fax sending When the machine is idle, the time operations and settings, see Sending a appears on the LCD.
Sending a fax Setting scanner glass size for Press Black Start or Color Start. faxing Faxing from the ADF The machine starts scanning the When documents are A4 size, you need to document. set the Scan Size to A4. If you do not, the bottom portion of the faxes will be missing.
Chapter 4 Transmission Verification Note Report • If you choose On+Image or Off+Image the image will only appear on the You can use the Transmission Verification Transmission Verification Report if Real Report as proof that you sent a fax. This Time Transmission is set to Off.
Will you be using Voice Mail on the same telephone line as your Brother machine? If you have Voice Mail on the same telephone line as your Brother machine, there is a strong possibility that Voice Mail and the Brother machine will conflict with each other when receiving incoming calls.
Page 42
Chapter 5 To set the receive mode follow the instructions below: Press Menu. Press a or b to choose Initial Setup. Press OK. Press a or b to choose Receive Mode. Press d or c to choose Fax Only, Fax/Tel, External TAD or Manual. Press OK.
Receiving a fax Using receive modes External TAD External TAD mode lets an external Some receive modes answer automatically answering device manage your incoming (Fax Only and Fax/Tel). You may want to calls. Incoming calls will be handled in one of change the ring delay before using these the following ways: modes.
Chapter 5 Receive mode settings F/T Ring Time (Fax/Tel mode only) Ring Delay When somebody calls your machine, you and your caller will hear the normal telephone ring The Ring Delay sets the number of times the sound. The number of rings is set by the ring machine rings before it answers in Fax Only delay setting.
Receiving a fax Easy Receive If Easy Receive is On: The machine can receive a fax automatically, even if you answer the call. When you see Receiving on the LCD or hear a click on the phone line through the handset you are using, just replace the handset.
Telephone services Get the Distinctive Ring service from your telephone company. Distinctive Ring is a feature of your Brother machine that allows a Your machine supports the Caller ID and person with one line to receive fax and voice Distinctive Ring subscriber telephone...
Distinctive Ring Do you have Voice Mail? If you have Voice Mail on the telephone line Distinctive Ring is a function of your Brother that you will install your new machine on, machine that allows a person with one line to...
Page 48
Distinctive Ring is set to On. This Ring Rings ensures the Brother machine will only answer Pattern the Distinctive Ring number and not interfere when your main telephone number is called. long-long short-long-short Press Menu.
Telephone services and external devices Connecting an external Turning off Distinctive Ring TAD (telephone Press Menu. answering device) Press a or b to choose Fax. Press OK. You may choose to connect an external Press a or b to choose answering device.
Chapter 6 Connections • If You Do Not Subscribe to Distinctive Ring Service: The external TAD must be plugged into the You must plug your TAD into the EXT. jack labeled EXT. Your machine cannot work jack of your machine. If your TAD is properly if you plug the TAD into a wall jack plugged into a wall jack, both your (unless you are using Distinctive Ring).
Telephone services and external devices Recording an outgoing Multi-line connections (PBX) message (OGM) on an We suggest you ask the company who external TAD installed your PBX to connect your machine. If you have a multi line system we suggest Timing is important in recording this you ask the installer to connect the unit to the message.
Chapter 6 External and extension Using external and extension telephones telephones Using extension telephones Connecting an external or If you answer a fax call at an extension extension telephone telephone, you can make your machine receive the fax by pressing the Fax Receive Code l 5 1.
The preset Fax Receive Code is l 5 1. The preset Telephone Answer Code is # 5 1. If you want to, you can replace them with your If your non-brother cordless telephone is own codes. connected to the EXT. jack of the machine and you typically carry the cordless handset Press Menu.
Dialing and storing numbers How to dial Press a or b to choose the number you want to dial. Press OK. Manual dialing Press Send a fax to confirm. Press all of the digits of the fax or telephone Note number.
Dialing and storing numbers Storing numbers Fax Redial If you are sending a fax manually and the line You can set up your machine to do the is busy, press Redial/Pause, and then press following types of easy dialing: Speed Dial Black Start or Color Start to try again.
Chapter 7 Do one of the following: Do one of the following: Enter the name (up to 16 characters) Press a or b to choose Change. using the dial pad. Press OK. Press OK. Press a or b to choose Delete. Press OK.
Making copies How to copy Do one of the following to load your document: Place the document face down in the The following steps show the basic copy ADF. operation. For details about each option, see the Advanced User’s Guide. (See Using the ADF on page 22.) Load your document face down on ...
Press a or b to choose Paper Type. For details about changing the following copy settings, see chapter 7: Press d or c to choose Plain Paper, Quality Inkjet Paper, Brother BP71, Brother BP61, Other Glossy or Enlarge/Reduce Transparency. Density Press OK.
Remote Setup & PhotoCapture Center Macintosh in the Software User’s Guide.) Using a memory card or USB Flash memory drive Your Brother machine has media drives (slots) for use with the following popular digital camera media: Memory Stick™, Memory Stick PRO™, Memory Stick Duo™, Memory Stick PRO Duo™, SD, SDHC and...
Chapter 9 Getting started Firmly put a memory card or USB Flash memory drive into the proper slot. 1 USB Flash memory drive IMPORTANT The USB direct interface supports only a USB Flash memory drive, a PictBridge compatible camera, or a digital camera that uses the USB mass storage standard.
Page 61
® PhotoCapture Center : Printing photos from a memory card or USB Flash memory drive PHOTO CAPTURE key lights: PHOTO CAPTURE light is on, the memory card or USB Flash memory drive is properly inserted. PHOTO CAPTURE light is off, the memory card or USB Flash memory drive is not properly inserted.
Chapter 9 ® Print Images PhotoCapture Center print settings View Photos You can change the print settings temporarily You can preview your photos on the LCD for the next printing. before you print them. If your photos are large These settings are temporary, and the files there may be a delay before each photo machine returns to its default settings is displayed on the LCD.
® PhotoCapture Center : Printing photos from a memory card or USB Flash memory drive How to scan to a Press a or b to choose Scan to Media. memory card or USB Flash memory drive SCAN SCAN Select & Press Scan a document Scan to File directly to a media...
Page 64
Chapter 9 Do one of the following: To change the file name, go to step j. Press Black Start or Color Start to start scanning without changing additional settings. The file name is set automatically; however, you can enter a name of your choice using the dial pad.
(See Printing for Windows or Printing and Faxing for Macintosh in the Software User’s Guide for details about the print settings.) Install the Brother printer driver on the Installation CD-ROM. (See the Quick Setup Guide.) From your application, choose the Print command.
(See Configuring Network (Macintosh users) Scanning in the Software User’s This function is available after you download Guide.) and install Presto! PageManager from http://nj.newsoft.com.tw/download/brother/ Load your document. (See How to load PM7Installer_BR_multilang.dmg documents on page 22.) (For network users) ...
IMPORTANT Brother strongly recommends that you do not refill the ink cartridges provided with your machine. We also strongly recommend that you continue to use only Genuine Brother Brand replacement ink cartridges.
Page 68
Turn the green knob on the protective Gently push in the ink cartridge until it yellow cap clockwise until it clicks to clicks, and then close the ink cartridge release the vacuum seal, then remove cover. the cap (1). The machine will automatically reset the ink dot counter.
Page 69
Routine maintenance IMPORTANT • DO NOT take out ink cartridges if you do not need to replace them. If you do so, it may reduce the ink quantity and the machine will not know the quantity of ink left in the cartridge. •...
You can correct most errors and clear routine maintenance messages by yourself. If you need more help, the Brother Solutions Center offers the latest FAQs and troubleshooting tips. Visit us at http://solutions.brother.com/...
Take out the new ink cartridge and Cannot Detect quickly and the machine did not detect re-install it slowly until it clicks. If you are not using Genuine Brother Use a new Genuine Brother Innobella™ ink the machine may not Innobella™ Ink Cartridge. If the error detect the ink cartridge.
Troubleshooting Error Message Cause Action One or more of the ink cartridges are Order a new ink cartridge. You can Ink low near the end of their life. If a sending continue printing until the LCD shows machine has a color fax to send, your Cannot Print.
Error Message Cause Action The Photo Bypass Tray is in the Photo Verify that the Photo Bypass Tray is in No Paper Fed printing position. the Normal printing position. (See step d and the Important note in Loading photo paper on page 13.) The machine is out of paper or paper Do one of the following: is not properly loaded in the paper...
Page 75
Please Disconnect connected to the USB direct interface. USB Device. For more information, visit us at http://solutions.brother.com/ Paper is not the correct size. Check that the Paper Size setting Wrong Paper Size matches the size of paper in the tray.
Error animation Transferring faxes to another fax machine Error animations display step-by-step If you have not set up your Station ID, you instructions when paper gets jammed. You cannot enter fax transfer mode. (See Set your can read the steps at your own pace by Station ID in the Quick Setup Guide.) pressing c to see the next step and d to go backward.
Page 77
Troubleshooting Transferring faxes to your PC Transferring the Fax Journal report to another fax machine You can transfer the faxes from your machine's memory to your PC. If you have not set up your Station ID, you cannot enter fax transfer mode. (See Set your Press Stop/Exit to interrupt the error Station ID in the Quick Setup Guide.) temporarily.
Document jam Document is jammed inside the ADF unit Documents can jam in the ADF unit if they are Take out any paper from the ADF that is not inserted or fed properly, or if they are too not jammed. long.
Troubleshooting Printer jam or paper jam Close the Jam Clear Cover. Make sure the cover is closed properly. Take out the jammed paper depending on where it is jammed in the machine. Unplug the machine from the AC power outlet. IMPORTANT Before you unplug the machine from the power source, you can transfer your faxes...
Page 80
Using both hands, grasp the plastic tabs Lift the scanner cover to release the on both sides of the machine and lift the lock ( ). Gently push the scanner cover scanner cover (1) until it locks securely support down ( ) and close the in the open position.
If you think there is a problem with your machine, check the chart below and follow the troubleshooting tips. Most problems can be easily resolved by yourself. If you need additional help, the Brother Solutions Center offers the latest FAQs and troubleshooting tips.
Page 82
Make sure that your ink cartridges are fresh. The following may cause ink to clog: The expiration date written on the cartridge package has passed. (Genuine Brother Innobella™ ink cartridges stay usable for up to two years if kept in their original packaging.) ...
Use at least 24 bit color data with the True2Life feature. Photo paper does not feed When you print on Brother Photo paper, load one extra sheet of the same photo properly. paper in the paper tray. An extra sheet has been included in the paper package for this purpose.
If your Brother machine is on a line with the Distinctive Ring subscriber service, please see Distinctive Ring on page 33. If your Brother machine shares a line with other telephones and you want it to automatically answer all incoming faxes, you should select the Fax/Tel mode. In Fax/Tel mode, your Brother machine will automatically receive faxes and produce a pseudo/double-ring to alert you to answer voice calls.
Page 85
If you are using a telephone answering machine (External TAD mode) on the same line as the Brother machine, make sure your answering machine is set up correctly. (See Connecting an external TAD (telephone answering device) on page 35.)
Sending Faxes Difficulty Suggestions Cannot send a fax. Check all line cord connections. Make sure the telephone line cord is plugged into the telephone wall jack and the LINE jack of the machine. Make sure that the FAX key is illuminated. Ask the other party to check that the receiving machine has paper.
Scanning Difficulties Difficulty Suggestions TWAIN or WIA errors appear when Make sure the Brother TWAIN or WIA driver is chosen as the primary source in your scanning application. For example, in PaperPort™11SE with OCR, click File, ® starting to scan. (Windows Scan or Get Photo and click Select to choose the Brother TWAIN or WIA driver.
Quick Setup Guide. Also, before you start FaceFilter Studio for the first time, you must make sure your Brother machine is turned on and connected to your computer. This will allow you to access all the functions of FaceFilter Studio.
It is necessary to set the third-party Security/Firewall Software to allow PC-FAX Rx. To add port 54926 for Network PC-FAX Rx, enter the information below: In Name: Enter any description, for example Brother PC-FAX Rx. In Port number: Enter 54926.
Page 90
® (Windows users) installed. If the Security Software warning appears on the PC screen during the installation, change the Security Software settings to permit the Brother product setup program or other program to run. BrC3Rgin.exe BrnIPMon Brother Status Monitor (Network) ControlCenter Program Generic Host Process f...
Unless interference is a recurring problem on your telephone line, you may prefer to use it only when needed. To improve compatibility with most VoIP services, Brother recommends changing the compatibility setting to Basic(for VoIP). Normal sets the modem speed at 14,400 bps.
You can reset all the machine settings back to the settings that were set at the Checking the serial number factory. Brother strongly recommends you use this You can see the machine’s serial number on operation when you dispose of the the LCD.
Menu and features On-screen programming Your machine is designed to be easy to operate with LCD on-screen programming using the menu keys. User-friendly programming helps you take full advantage of all the menu selections your machine has to offer. Since your programming is done on the LCD, we have created step-by-step on-screen instructions to help you program your machine.
1Min 2Mins* 5Mins — Sets the type of paper in Paper Type Plain Paper* the paper tray. Inkjet Paper Brother BP71 Brother BP61 Other Glossy Transparency — Sets the size of the paper Paper Size Letter* in the paper tray.
Page 95
Menu and features Level1 Level2 Level3 Options Descriptions Page Adjusts the ring volume. General Setup Volume Ring (Continued) Med* High Adjusts the volume level Beeper of the beeper. Low* High Adjusts the volume level Speaker of the speaker. Med* High —...
Page 96
Level1 Level2 Level3 Options Descriptions Page Sets the number of rings Setup Receive Ring Delay before the machine answers in Fax Only or Fax/Tel mode. Sets the pseudo/double- F/T Ring Time 20Secs* ring time in Fax/Tel mode. 30Secs 40Secs 70Secs Receives fax messages Easy Receive without pressing Start.
Page 97
Menu and features Level1 Level2 Level3 Options Descriptions Page Initial setup for Report Setting Transmission Transmission Verification (Continued) On+Image Report and Fax Journal Report. Off* Off+Image Journal Period Every 50 Faxes* Every 6 Hours Every 12 Hours Every 24 Hours Every 2 Days Every 7 Days —...
Network menu Level1 Level2 Level3 Level4 Options Descriptions Chooses the Network Wired LAN TCP/IP BOOT Method Auto* BOOT method Static that best suits your needs. RARP BOOTP DHCP [000-255]. Enter the IP IP Address address. [000-255]. [000-255]. [000-255] [000-255]. Enter the Subnet Subnet Mask mask.
Page 99
Menu and features Level1 Level2 Level3 Level4 Options Descriptions — Chooses the Network Wired LAN Ethernet Auto* Ethernet link (Continued) (Continued) 100B-FD mode. 100B-HD 10B-FD 10B-HD — — You can see your MAC Address machine’s MAC address from the control panel. Chooses the WLAN TCP/IP...
Page 100
Level1 Level2 Level3 Level4 Options Descriptions Automatically Network WLAN TCP/IP APIPA allocates the IP (Continued) (Continued) (Continued) address from the link-local address range. — — You can Setup Wizard manually configure your print server for a wireless network. — — You can easily WPS/AOSS configure your...
Page 101
Menu and features Menu ( ) (continued) Level1 Level2 Level3 Options Descriptions Page — — Prints these lists and Print Reports Transmission reports. — — Help List — Quick Dial Alphabetic Order Numeric Order — — Fax Journal — — User Settings Network Config —...
Page 102
Level1 Level2 Level3 Options Descriptions Page — Resets the print server Initial Setup Reset Network back to its factory default (Continued) settings, such as the password and IP address information. — Deletes all stored Speed Dial&Fax Speed Dial numbers and restores the Station ID, Quick Dial List, Transmission Verification...
Page 103
Menu and features FAX ( Level1 Level2 Level3 Options Descriptions Page — — Adjust the volume level of Speaker the speaker. (Appears after pressing Hook) Med* High — — Sets the resolution for Fax Resolution Standard* outgoing faxes. Fine S.Fine Photo —...
Page 104
Level1 Level2 Level3 Options Descriptions Page — — You can send a fax without Real Time TX using the memory. Off* — — Sets up your machine with a Polled TX document to be retrieved by Off* another fax machine. —...
Page 105
Scan to Image into your graphics application. See Software User’s Guide. See Advanced User’s Guide. (Macintosh users) This function is available after you have downloaded and installed Presto! PageManager from http://nj.newsoft.com.tw/download/brother/PM7Installer_BR_multilang.dmg The factory settings are shown in Bold with an asterisk.
Page 106
— — Choose the paper type that Paper Type Plain Paper* matches the paper in the Inkjet Paper tray. Brother BP71 Brother BP61 Other Glossy Transparency — — Choose the paper size that Paper Size Letter* matches the paper in the Legal tray.
Page 107
Menu and features Level1 Level2 Level3 Options Descriptions Page — — Adjusts the density of Density copies. — — You can save some ink. Ink Save Mode Off* — — You can choose to stack or Stack/Sort Stack* sort multiple copies. Sort —...
Page 108
Watermark Copy Settings Option1 Option2 Option3 Option4 Descriptions Page — Uses a template to place Template Text CONFIDENTIAL* text into your document as DRAFT a Watermark. COPY Position Pattern Size Small Medium* Large Angle -90 -45* 0 45 90 Transparency Color Orange Yellow...
Page 109
Menu and features Option1 Option2 Option3 Option4 Descriptions Page (Select image Places a logo or text into Media Position from media) your document as a Watermark using an image from removable media. Pattern Size Small Medium* Large Angle -90 -45* 0...
Page 110
You can print a thumbnail Print Index Layout Format 6 Images/Line* page. 5 Images/Line Paper Type Plain Paper* Inkjet Paper Brother BP71 Brother BP61 Other Glossy Paper Size Letter* — — See the print You can print an individual Print Photos settings in the image.
Page 111
Photo* when DPOF Print is chosen.) — — Choose the paper type. Paper Type Plain Paper Inkjet Paper Brother BP71 Brother BP61 Other Glossy* (When A4 or — Choose the paper and print Paper Size 4"x 6"* Letter is chosen) size.
Page 112
Option1 Option2 Option3 Option4 Descriptions Page Adjusts the hue of the white True2Life White Balance areas. (Does not appear Off* when Enhance Photos is chosen.) Enhances the detail of the Sharpness image. Adjusts the total amount of Color Density color in the image. —...
Menu and features Speed Dial ( ) Level1 Level2 Level3 Options Descriptions Page — — You can search for names Search Alphabetic Order you have stored in the Numeric Order Speed Dial memory. — — — You can set up Speed Dial Set Speed Dial numbers, so you can dial by pressing only a few keys...
Entering Text When you are setting certain menu selections, such as the Station ID, you may need to enter text into the machine. Most dial pad keys have three or four letters printed on keys. The keys for 0, # and l do not have printed letters because they are used for special characters.
Specifications General Printer Type Inkjet Piezo with 94 1 nozzle Print Method Black: Piezo with 94 3 nozzles Color: Memory Capacity 40 MB LCD (Liquid Crystal Display) Wide 3.3 in. (82.79 mm) TFT Color LCD Power Source AC 100 to 120 V 50/60 Hz Power Consumption Copying Mode: Approx.
Copy Color/Black Yes/Yes Copy Width Max. 8.26 in. (210 mm) Multiple Copies Stacks/Sorts up to 99 pages Enlarge/Reduce 25% to 400% (in increments of 1%) Resolution (Black) Prints up to 1200 1200 dpi (Color) Prints up to 600 1200 dpi ...
Up to 8.26 in. (210 mm) Scanning Length Up to 11.45 in. (291 mm) Gray Scale 256 levels For the latest driver updates for the Mac OS X you are using, visit us at http://solutions.brother.com/ ® ® ® ® Windows XP in this User’s Guide includes Windows...
Specifications Printer Up to 1200 6000 dpi Resolution Printing Width 8.26 in. [8.5 in. (borderless) Letter, A4, A6, Photo 4" 6", Index Card 5" 8", Borderless Photo L 3.5" 5", Photo 2L 5" 7", Postcard 1 3.9" 5.8" When the Borderless feature is set to On.
® ® For the latest driver updates, visit us at Microsoft Internet Explorer 5.5 or greater. For WIA, 1200 1200 resolution. Brother Scanner (in USA) www.brother.com Utility enables to enhance up to 19200 19200 dpi. (in Canada) www.brother.ca Third party USB ports are not supported.
For more information about the replacement consumables, visit us at www.brother.com/pageyield What is Innobella™? Innobella™ is a range of genuine consumables offered by Brother. The name "Innobella™" derives from the words "Innovation" and "Bella" (meaning "Beautiful" in Italian) and is a representation of the "innovative"...
SSID (32 chr), WEP 64/128 bit, WPA-PSK (TKIP/AES), Security WPA2-PSK (AES) Setup Support Utility AOSS™ See the Computer Requirements chart on page 108. If you require more advanced printer management, use the latest Brother BRAdmin Professional utility version that is available as a download from http://solutions.brother.com/...
Easy Receive ........31 Document loading ..........22 Brother accessories and supplies ......ii Easy Receive .......... 31 Brother numbers ........i Envelopes ......11 CreativeCenter ........4 Error messages on LCD ......56 Customer Service ........i B&W Print Only ........56 FAQs (frequently asked questions) ..
Page 126
Fax codes Jacks changing ..........39 Fax Receive Code ....31 External telephone ......38 Telephone Answer Code ....38 Jams using .............39 document ..........64 Fax, from PC paper ............ 65 See Software User's Guide. Fax, stand-alone receiving ..........27 LCD (Liquid Crystal Display) ....7 difficulties ........
Page 127
Paper ..........18 Quick Dial capacity ..........21 Group dial loading ..........9 changing ..........42 loading envelopes and postcards ..11 Search ..........40 loading photo paper ......13 Speed Dial printable area ........16 changing ..........42 size ............17 setting up ........... 41 size of document ........22 using ..........
Page 128
TAD (telephone answering device), external ..........27 connecting ........35 receive mode ........27 recording OGM ........37 Teen Ring ..........32 Telephone line connections ...........36 difficulties ..........70 interference ...........77 multi-line (PBX) ........37 Text, entering .........100 special characters .......100 Transferring your faxes or Fax Journal report ........62 Transparencies ....
Page 129
Brother International Corporation 100 Somerset Corporate Boulevard P.O. Box 6911 Bridgewater, NJ 08807-0911 USA Brother International Corporation (Canada) Ltd. 1 rue Hôtel de Ville, Dollard-des-Ormeaux, QC, Canada H9B 3H6 Visit us on the World Wide Web http://www.brother.com These machines are made for use in the USA and Canada only. We cannot recommend using...