Displaying Information About The Monitor - Status Menu; Structure And Usage Of The Status Menu - Sony BVM-14F5U Operation Manual

Displaying Information About the Monitor
— STATUS Menu
The STATUS menu is used to view general data about
the monitor and information about signals assigned to
the slots in the rear panel.

Structure and Usage of the STATUS Menu

This section explains the setting lists displayed in the
menu.
How to read the setting lists
• For purposes of explanation, each setting list is
preceded by a 3-digit number. These numbers are not
displayed on the screen.
• Setting lists are indented to indicate their position in
the tree structure of the menu. (When list YYY is
found under list XXX, it is indented to the right of
list XXX.)
• The arrow mark (÷) refers you to another setting
list that appears after you make the setting, or to an
operation that is carried out as a result of the setting.
When there is no arrow mark, you can make the
setting using a single list.
Select STATUS from the menu list.
CONTROL PRESET ADJ...
COLOR TEMP ADJ...
SET UP...
MEMORY CARD...
COPY...
STATUS... ÷ 900
MAINTENANCE...
KEY PROTECT OFF
Menu list
900
STATUS menu (1/3): Data about the current channel is displayed.
CH: channel number
SL: slot number
IN: input connector number
FORMAT: format of the input signal
NAME: channel name
900
STATUS menu (2/3): Data about the monitor is displayed.
MODEL NAME: model name
SERIAL NO: serial number
OPERATION TIME: operation time (in hours)
SOFTWARE VERSION: software version
57