Removing The Internal Modem - Toshiba 2000 User Manual

User's Manual
10. Insert the HDD pack into the slot.
11. Secure the HDD pack cover with two screws.
12. Install the Battery Pack.

Removing the internal modem

To remove the internal modem.
1. Save your data, quit Windows and turn off the power.
2. Disconnect the AC Adaptor and any other peripheral devices.
3. Turn the computer upside down and remove the Battery Pack.
4. Remove two screws securing the HDD pack cover and remove the HDD pack.
5. Remove fifteen screws (one screw has a rubber cover). Do not remove the
screws securing the memory module.
6. Remove the bottom cover. You can check the PPT label at this point.
7. Remove two screws securing the modem and remove it.
8. Disconnect the modem cable.
9. Secure fifteen screws.
10. Insert the HDD pack into the slot.
11. Secure the HDD pack cover with two screws.
12. Install the Battery Pack.
The internal modem is approved by Japan Approvals Institute for Telecommu-
nications Equipment.
H-2
A00-0940JP