Toshiba 2000 User Manual page 67

Auto Switch
When Auto Switch is selected, this application automatically enables the wireless
LAN device when you disconnect the LAN cable. This feature works only if a wired
LAN device is currently enabled and the LAN uses TCP/IP protocol.
Disabled
Click Disabled to disable or enable this program's features.
Help
Click Help to display a readme file.
Exit
Click Exit to quit the program.
NOTES: 1. If you change the network device, you might need to log
onto the network again.
2. Log on as the administrator.
If the Control device power management checkbox in the Device Settings window
of Power Saver is enabled, the following four events will trigger a change in settings
made in the Device Setting window of the Power Saver utility. The change will occur
regardless of the Network Device Switch setting. To avoid these automatic
changes, clear the Control device power management checkbox in the Power
Saver utility. For details, refer to the Power Saver utility's help files.
1. You start the computer on battery power.
2. You start the computer with the AC adapter connected and disconnect the AC
adapter during operation.
3. You change the Power Saver settings.
4. The computer resumes operation in suspend or hibernation mode.
LAN
4-9