English
Working with the digital pen in online mode
Proceed as follows:
1. Connect the base unit to a free USB socket on your computer with the
connection cable.
2. Secure the base unit to a sheet of paper or a block.
3. Start the "Note Manager" by selecting [Windows Start button]
grammes"
The "Note Manager" window opens.
4. If mouse mode is active (PC mouse on display), press the base unit but-
ton (D) once.
A pen is shown on the display in pen mode. As soon as the pen touches
the paper, a virtual block and an icon bar appear on the screen.
Tip: You can switch between mouse and pen mode by placing the pen on
the square area shown in the figure.
Information on the functions of the icons is given further on in the section
"The icon bar of the virtual block".
5. Enter your notes.
6. To save your notes or sketches, click the button with the check sign in the
icon bar of the virtual block.
The "Note Manager" window is active again. Your notes are displayed in
this window.
24
"Note Manager"
"Note Manager".
"All pro-
Silvercrest DGP1000