D-Link DCS-2136L User Manual page 32

Section 4: Configuration
Enable PPPoE:
Enable this setting if your network uses PPPoE.
User Name /
Enter the username and password for your PPPoE
Password:
account. Re-enter your password in the Confirm
Password field. You may obtain this information from
your ISP.
HTTP Port:
The default port number is 80.
Access Name for
The default name is video#.mjpg, where # is the
Stream 1~3:
number of the stream.
HTTPS Port:
You may use a PC with a secure browser to connect to
the HTTPS port of the camera. The default port number
is 443.
RTSP Port:
The port number that you use for RTSP streaming
to mobile devices, such as mobile phones or PDAs.
The default port number is 554. You may specify the
address of a particular stream. For instance, live1.sdp
can be accessed at rtsp://x.x.x.x/video1.sdp where the
x.x.x.x represents the ip address of your camera.
Enable CoS:
Enabling the Class of Service setting implements a
best-effort policy without making any bandwidth
reservations.
Enable QoS: Enabling QoS allows you to specify a traffic priority
policy to ensure a consistent Quality of Service during
busy periods. If the DCS-2136L is connected to a router
that itself implements QoS, the router's settings will
override the QoS settings of the camera.
D-Link DCS-2136L User Manual 32