D-Link DCS-2136L User Manual page 37

Section 4: Configuration
Exposure Mode: Changes the exposure mode. Use the drop-down
box to set the camera for Indoor, Outdoor, or Night
environments, or to Moving to capture moving
objects. The Low Noise option will focus on creating a
high-quality picture without noise. You can also create
3 different custom exposure modes. The Max Gain
setting will allow you to control the maximum amount
of gain to apply to brighten the picture.
Denoise: This setting controls the amount of noise reduction
that will be applied to the picture.
Brightness: Adjust this setting to compensate for backlit subjects.
Contrast: Adjust this setting to alter the color intensity/strength.
Saturation: This setting controls the amount of coloration, from
grayscale to fully saturated.
Sharpness: Specify a value from 0 to 8 to specify how much sharpening
to apply to the image.
WDR Level: The WDR function is especially effective in environment
with extreme contrast such as lobby entrances, parking
lots, ATMs, and loading areas. A higher WDR setting will
help in reducing areas with high contrast.
3D filter: Setting this option to Low, Medium, or High will help to
reduce image artifacts, and result in images with less blur
when viewing the camera during the night or in areas
where there are low levels of light.
Reset Default:
Click this button to reset the image to factory default
settings.
D-Link DCS-2136L User Manual 37