Description Of The Appliance (Fig. 1) - Kenwood SC5000 Instruction Manual

Dear Customer
Thank you for having chosen our product and allow us to congratulate you for having purchased the STEAM
MOP 5000, which has been designed in order to change the old methods of manual floor cleaning. This
appliance has been designed to obtain ,not only a perfectly clean floor, but also effective sterilisation of sur-
faces through the degreasing and cleaning power of steam that eliminates bacteria, microbes, mites without
the use of chemicals.
Analysis carried out has shown how, in just a few seconds, a jet of concentrated steam from STEAM MOP
5000 is able to destroy over 90% of mites in dust, largely responsible for respiratory allergies. This amounts
to preventative action which benefits those persons subject to allergies of this kind. All of this is due to the
active power of steam, and without need of detergents or soap, so it's absolutely ECOLOGICAL.

DESCRIPTION OF THE APPLIANCE (Fig. 1)

A. Appliance body
B. Attachment clips
C. Water Tank
D. Steam ready indicator
E. Power 'ON' indicator
F. Water tank plug
G. Handle extension with cord winder
H. Lower handle extension
I. Cloth
L. Pre-heating pad
M. Power cord
N. Adjustable water flow regulator
O. Extension lock buttons
INSTRUCTIONS FOR USE
Using the appliance is very easy.
Fig. 2 Once the appliance has been unpacked, join together the extensions (G & H) and make sure that the
lock button (O) snaps in. Then fit the extension (H) in the appliance's body (A) and make sure that the lock
button (O) snaps in.
Fig. 3 Position the appliance body over the centre of the provided Cloth . Secure the ends under the cloth
clips (B). Place the Steam Mop on the provided pre-heating pad (L).
Fig. 4 Remove the water tank plug (F) and fill the tank (C) with water. Make sure beforehand that the adju-
stable water flow regulator (N) is in the closed position, marked O on the housing.
Fig. 2 Connect the water tank (C) to handle extension (G) and make sure that the lock button (O) snaps in.
Now insert the plug of the power cord into the power outlet. The appliance starts to heat up as soon as the
power is turned on. The power indicator (E) will light up. As soon as the steam ready indicator (D) comes on
the Steam Mop is ready to use.
Turn the water flow regulator (N) to "l" for the steam outlet (see fig. 5).