Siemens SIMATIC Industrial Flat Panel IFP1500 Operating Instructions Manual page 42

Installing and connecting the device
3.3 Connecting the device
Procedure
42
1. Ensure that the cable ends of the
power supply lines are fitted with end
sleeves.
2. Fasten the end of a connecting cable
L+ and a connecting cable M with the
supplied power supply terminal.
3. Connect the power supply terminal to
the relevant terminal on the device.
4. Connect the remaining L+ and M ends
with the respective terminals on the
24 V DC power supply.
5. Switch on the 24 V DC power supply.
Industrial Flat Panel IFP1500, IFP1900, IFP2200
Operating Instructions, 06/2014, A5E31298376-AB