Panel light state
N On
N K B
N Y B*
N M B*
N C B*
N On
F K B
F Y B*
F M B*
F C B*
F On
F Cover
F K B, F Y B, F M B, F C B
**
F K B, F K B ***
F On
F Cover
F Paper
F Tear Off
F Pause
* The status of the right black ink light is shown for the GP-M830/GP-M831/GP-M832.
** All of the ink lights flash at the same time (GP-C830/GP-C831/GP-C832).
*** Both of the ink lights flash at the same time (GP-M830/GP-M831/GP-M832).
N = on, F = flashing
O = Ten long beeps
O O O O O = Five sets of five short beeps (twenty-five beeps)
GP-C830/GP-M830/GP-C831/GP-M831/GP-C832/GP-M832
Beep pattern
Problem
Solution
The ink cartridge has reached its replacement time.
O
Replace the ink cartridge. For more information, see "Replacing an
ink cartridge" on page 75.
The ink cartridge is not installed.
O
Install the ink cartridge. For more information, see "Replacing an ink
cartridge" on page 75.
-
Ink is low.
Obtain a replacement ink cartridge.
A product maintenance error has occurred.
O O O O O
Contact a qualified service person.
A fatal error has occurred.
O O O O O
Turn off the printer and check for a paper jam. If there is a paper jam,
remove the jammed paper, and then turn on the printer.
If the scale is dirty, clean it with a soft cloth. See "Cleaning the Printer"
on page 103.
If the problem persists, turn off the printer, wait several minutes, and
then turn it on again.
User's Guide
Troubleshooting
56