Sharp PA-VR10E PC Operation Manual page 29

Plug the larger connector into a USB port on your personal
2
computer.
Notes:
• Do not force the USB connectors when inserting them. If the
connector cannot be plugged in easily, make sure it is not upside
down.
• Connect the digital voice recorder directly to a USB port on your
PC using a PC-Link cable.
• Make sure the digital voice recorder is powered on before
connecting it to your PC.
• Make sure the recorder is not connected to the PC during
recording or playback.
Playing recordings on a PC
Installing the software
Use the procedure below to install the data conversion tool from
the bundled CD-ROM onto your PC.
Turn on the PC and launch Windows.
1
Load the bundled CD-ROM into the PC's CD-ROM drive.
2
When the Setup window appears, select "Installation of WAV
3
conversion tool".
If the program does not start automatically, access the CD-
ROM using Explorer and double-click the "installer.exe" file.
Proceed as directed by the on-screen instructions.
4
When the installation is complete, click "Finish".
5
Playing back audio files
Connect the recorder to your PC.
1
Double-click the "Data Conversion Tool" icon on the PC
2
desktop. The window shown below appears.
E-27