Important Information - Sharp PA-VR10E PC Operation Manual

Replacing the batteries
Once the batteries are becoming exhausted, you will no longer be
able to record or play back voice recordings. Before replacing the
batteries, be sure to read the following information carefully and
observe the instructions closely.
Batteries used
Type
AAA-size alkaline batteries
Use only the designated battery type. Other batteries may have
different capacities or voltages and could cause malfunctions or
faults.
Notes:
• Remove the batteries if the recorder will not be used for a
long period.
• Never remove batteries while the recorder is operating.
Removing the batteries during recording, while recording is
paused, during playback, or while erasing is in progress
could result in recorded data not being saved or in loss of all
recorded data.
• Leaving depleted batteries in the recorder may result in
battery fluid leakage and damage to the recorder.
• The batteries supplied with the recorder were included at
shipment and may become exhausted before their suggested
operating time.
When to replace the batteries
The icon in the top-right corner of the display indicates when
the batteries are becoming exhausted and should be replaced soon.
Battery level icons
: Full
: Low
Battery operating times
• Continuous recording time (in LP mode): Approx. 8 hours
• Continuous playback time (in LP mode): Approx. 6 hours

Important Information

Model Quantity
LR03 2
E-31