Canon G2000 Instruction Manual page 53

How much power is left?
The indicator in the display shows you
approximately how much charge the battery
pack has left (when a battery pack is directly
attached to the camera):
Notes:
• The mark starts blinking in the display
when the power is completely exhausted.
• The indicator is not constant — different
levels will be shown when you subject the
battery pack and camcorder to different
conditions.
When to recharge
You can recharge a lithium ion battery pack whenever it is convenient. Unlike a
conventional battery pack, it does not have to be fully discharged first. However,
as the battery pack will naturally discharge itself over time, it is best to charge it
the same day you plan to use it, or the day before.
Taking care of the battery pack
Always attach the terminal cover.
• Do not allow any metal objects to touch
the terminals, as this can cause a short
circuit and damage the battery pack.
Attach the terminal cover whenever the
battery pack is not being used.
Keep the terminals clean.
• The camera, adapter or battery pack will
not work properly if the terminals are
dirty. Check them before use, and wipe
them with a dry cloth or tissue if necessary.
Storing the battery pack.
• If you do not use a battery pack for a period of more than a few months any
remaining charge may cause damage to the battery pack, and reduce usage time.
To prevent damage therefore, aim to use a battery pack's complete charge before
storage.
• Store the battery pack in an area which is free of moisture and where the
temperature is no higher than 30°C (86°F).
100%
↓
↓
↓
↓
0%
E
53