Page 2
Thank you for buying an innovative product from Fujitsu. Latest information about our products, useful tips, updates etc. is available on our website: "http://www.fujitsu.com/fts/" You can find driver updates at: "http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: •...
Page 5
FUTRO S720 FUTRO S920 ESPRIMO A525-L Operating Manual Validity of the Reference Manual Notational conventions Ports and operating elements Important notes Getting started Operation System expansions Technical data Index...
Page 6
Information on the product description meets the design specifications of Fujitsu and is provided for comparison purposes. Several factors may cause the actual results to differ. Technical data is subject to change without prior notification. Fujitsu rejects any responsibility with regard to technical or editorial mistakes or omissions.
Overview of optional system components ..........28 Possible combinations for the FUJITSU Thin Client FUTRO S920 ..... . . 29 Information about boards .
Page 8
Removing the loudspeaker ............40 Installing and removing a speaker: FUJITSU Desktop ESPRIMO A525-L ....41 Installing a speaker .
Validity of the Reference Manual Validity of the Reference Manual This Reference Manual is valid for the following systems: • FUJITSU Thin Client FUTRO S720 • FUJITSU Thin Client FUTRO S920 • FUJITSU Desktop ESPRIMO A525-L Fujitsu...
"Safety information" • cross-references to an external source, e.g. a web address: For more information, go to "http://www.fujitsu.com/fts" • Names of CDs, DVDs and titles or designations for other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual indicates a key on the keyboard, e.g:...
Make sure that the rated current of the mains adapter is not higher than that of the power system to which you connect the mains adapter. ON/OFF switches do not disconnect the device from the mains voltage. To completely disconnect the mains voltage, remove the power plug from the power socket. Fujitsu...
ESPRIMO A525-L for use via the Power over Ethernet module With the aid of the Power over Ethernet module, you can operate the FUTRO S720/S920 or the ESPRIMO A525-L over the LAN without any additional power connection. You will need a suitable network infrastructure for this.
Ensure that no liquid enters the system. The surface can be cleaned with a dry cloth. If particularly dirty, use a cloth that has been moistened in mild domestic detergent and then carefully wrung out. Use disinfectant wipes to clean the keyboard and the mouse. Fujitsu...
You can find information on these subjects in chapter "Activating power-saving mode", Page 25, on the Recovery DVD or on our website ("http://www.fujitsu.com/fts/about/fts/environment-care/"). Information on "Ökodesign-Richtlinie": Regulation 1275/2008, based on the EU Eco-design Directive (2009/125/EU), defines requirements for the power consumption of electrical and electronic domestic and office devices in stand-by and off mode.
Fujitsu is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by Fujitsu. The correction of interferences caused by such unauthorized modification, substitution or attachment will be the responsibility of the user.
This device complies with the requirements of EC directives 2004/108/EC "Electromagnetic compatibility", 2006/95/EC "Low voltage directive" and 2009/125/EC "Ecodesign directive". For this purpose, please also note the special information concerning the "Ecodesign directive" for the FUTRO systems (see "Energy saving, disposal and recycling", Page 12). Fujitsu...
Proceed as follows to prepare the device for the vertical operating position: ► Disconnect the cables if required. ► Lay the device on its top (narrow side) as shown, on a stable, flat and clean surface. Fujitsu...
Page 20
► Repeat for each foot: Push the outer elements of the foot evenly onto the casing using both hands, keep the "Push" button pressed (see magnifier) and push the foot in the direction of the arrow (2) until it is heard to engage. Fujitsu...
Page 21
Getting started ► Stand the device on the feet. ► If necessary, reconnect any cables that were previously disconnected. Fujitsu...
Unlock and release the foot = push to the right (open lock) ► Repeat for each foot: Keep the "Push" button pressed down (see magnifier) and push the foot in the direction of the arrow (2) until it is heard to engage. Fujitsu...
Page 23
Getting started ► Stand the device on the feet. ► If necessary, reconnect any cables that were previously disconnected. Fujitsu...
► Switch off all affected devices. Cable, ► Remove all power plugs from the grounded mains outlets. ► Unplug all data communication cables from the appropriate sockets. ► Disconnect all of the cables from the device and from the external devices. Fujitsu...
► Follow the instructions contained in the monitor manual to prepare the monitor for operation (e.g. connecting cables). Monitor, ► Connect the data cable to the required monitor port on your device. ► Plug the monitor power cable into the grounded mains outlet. Fujitsu...
► Plug the rectangular connector of the keyboard cable into the rectangular socket on the underside or on the rear of the keyboard. ► Plug the round plug of the keyboard cable into the keyboard port on the device. Keyboard, ► Switch your device on again. Fujitsu...
To ensure the transmission capacity of USB 2.0, the cable from the external USB device to the USB port of your device must not be longer than 3 m / 118.11 inches. Fujitsu...
► Connect the power cable to the mains adapter. ► Plug the power cable into a grounded mains outlet. Connecting the device to the network (LAN) ► Connect the 10/100/1000 Base T network cable to the RJ45 LAN port. Fujitsu...
► When the system starts, press the key (several times if necessary). BIOS Setup will be started. Select one of the tabs to access other setting options in BIOS Setup. PXE system boot PXEsystem boot ► Switch the device on with the ON/OFF switch. Fujitsu...
If a BBS-BIOS (BIOS Boot Specification) exists, the system is started by the BBS-BIOS. ROM Disabled The entire mechanism for the system boot is deactivated. The system can only be activated via the local devices. Int 18h The devices set in BIOS Setup are enabled. Fujitsu...
Page 31
Indicates the time in seconds for which the following message is Message displayed during the system boot: Time: Realtek RTL8139(X)/8130/810X Boot Agent Press Shift-F10 to configure ……. The settings are not effective until after saving and another PXE system boot. Fujitsu...
Further information can be found in the BIOS help section or if necessary in the Technical Manual for the mainboard. Overview of optional system components The following optional system components can be installed in the various device types: FUJITSU Thin Client FUJITSU Thin Client FUJITSU Desktop System component...
* In each case, only one of these components can be simultaneously installed in a system. Possible combinations for the FUJITSU Thin Client FUTRO S920 For the FUJITSU Thin Client FUTRO S920, the following system components can be combined together: Power...
The equipment and tools you use must be free of static charges. • Only touch or hold the boards by the edge or, if present, at the areas marked green (Touch Points). • Never touch pins or conductors on boards fitted with ESDs. Fujitsu...
► Remove any connected wires which are in the way. ► Loosen the screws at the rear (1). ► Slide the casing cover in the direction of the arrow (2) and swing out the casing cover towards the front (3). Fujitsu...
Installing a memory module ► Insert the memory module with the contacts and the recess (a) facing the slot (1). Memory expansion Memory module ► Carefully push the memory module downwards until you feel it click into place (2). Fujitsu...
System expansions Installing and removing the SmartCard reader (FUJITSU Thin Client FUTRO S920 only) If you are also installing the optional loudspeaker, install the SmartCard reader before the loudspeaker. Installing the SmartCard reader SmartCardreader If not already installed, you can fit a SmartCard reader.
Page 38
System expansions ► Place the carrier for the SmartCard reader in the casing (1). ► Fasten the carrier with the screw (2). Fujitsu...
Page 39
► When required, reinstall the cross piece and the PCIe board (see "Installing the board", Page 55). ► Close the casing (see "Closing the casing", Page 59). Make sure that the cables are not trapped between the casing and the components. Fujitsu...
► When required, reinstall the cross piece and the PCIe board (see "Installing the board", Page 55). ► Close the casing (see "Closing the casing", Page 59). Ensure that cables are not trapped between the casing and the components. Fujitsu...
(optional) You can install an additional speaker in your device: • For FUJITSU Thin Client FUTRO S720 / FUJITSU Thin Client FUTRO S920, see chapter "Installing and removing a speaker: FUJITSU Thin Client FUTRO S720 / FUJITSU Thin Client FUTRO S920", Page 37 •...
Page 42
System expansions ► Secure the hexagon head bolts provided into the screw holes (1). Fujitsu...
Page 43
► When required, reinstall the cross piece and the PCIe board (see "Installing the board", Page 55). ► Close the housing (see "Closing the casing", Page 59). Ensure that the cables are not trapped between the housing and the components. Fujitsu...
► Undo the screws (2). ► Lift the loudspeaker out of the housing. ► When required, reinstall the cross piece and the PCIe board (see "Installing the board", Page 55). ► Close the housing (see "Closing the casing", Page 59). Fujitsu...
System expansions Installing and removing a speaker: FUJITSU Desktop ESPRIMO A525-L Before installing a speaker in the FUJITSU Thin Client ESPRIMO A525-L, you must first remove the hard disk. Installing a speaker Removing a hard disk Harddisk ► Open the housing (see "Opening the casing", Page...
Page 46
System expansions ► Slide the hard disk in the direction of the arrow (1). ► Lift the hard disk out of the casing (2). Fujitsu...
Page 47
System expansions Installing the loudspeaker Loudspeaker The required hexagon head bolts are included in the delivery scope of the loudspeaker. ► Secure the hexagon head bolts provided into the screw holes (1). Fujitsu...
Page 48
System expansions ► Insert the loudspeaker into the housing as illustrated. ► Secure the loudspeaker with the screws (1). ► Connect the loudspeaker cable to the connector on the mainboard (2). Fujitsu...
System expansions Installing a hard disk Loudspeaker ► Insert the hard disk into the casing (1). ► Slide the hard disk in the direction of the arrow (2). Fujitsu...
Page 50
► Secure the hard disk with the screw (1). ► Connect the cables to the hard disk (2). ► Close the housing (see "Closing the casing", Page 59). Make sure that the cables are not trapped between the casing and the components. Fujitsu...
System expansions Removing a speaker Removing a hard disk Harddisk ► Open the housing (see "Opening the casing", Page 31). ► Disconnect the cables from the hard disk (1). ► Undo the screw (2). Fujitsu...
Page 52
System expansions ► Slide the hard disk in the direction of the arrow (1). ► Lift the hard disk out of the casing (2). Fujitsu...
Page 53
System expansions Removing the loudspeaker Loudspeaker ► Disconnect the loudspeaker cable from the mainboard (1). ► Undo the screws (2). ► Lift the loudspeaker out of the housing. Fujitsu...
Page 54
System expansions Installing a hard disk Loudspeaker ► Insert the hard disk into the casing (1). ► Slide the hard disk in the direction of the arrow (2). Fujitsu...
Before using the module for the first time, please pay attention to the notes in chapter "Important notes on preparing your FUTRO S720/S920 or ESPRIMO A525-L for use via the Power over Ethernet module", Page If you are supplying the system with power via the PoE module, ensure that no additional power supply (mains adapter) is connected.
► If a PCIe board is installed, you must remove the cross piece and PCIe board (see "Removing the board", Page 57). ► FUJITSU Desktop ESPRIMO A525-L: If a hard disk is installed, remove it (see "Removing a hard disk", Page 41).
Page 57
System expansions ► Secure the Power over Ethernet module with the screws (1). ► FUJITSU Desktop ESPRIMO A525-L: When required, reinstall the hard disk (see "Installing a hard disk", Page 45). ► When required, reinstall the cross piece and the PCIe board (see "Installing the board", Page...
► If a PCIe board is installed, you must remove the cross piece and PCIe board (see "Removing the board", Page 57). ► FUJITSU Desktop ESPRIMO A525-L: If a hard disk is installed, remove it (see "Removing a hard disk", Page 41).
► Enter the required settings for the board. ► Open the casing (see "Opening the casing", Page 31). ► Insert the riser card in its slot (1). ► Undo the screw (1) and remove the rear slot cover plate of the slot (2). Fujitsu...
Page 60
► Insert the board into the riser card (1). ► Fix the board with the screw (2). ► Install the cross piece (3). ► Secure the cross piece with the screw (4). ► Close the casing (see "Closing the casing", Page 59). Fujitsu...
(regulations on electromagnetic compatibility) to be complied with. ► Reinstall the rear slot cover plate by inserting it in the installation slot from the inside and securing it with the screw. ► Close the casing (see "Closing the casing", Page 59). Fujitsu...
► Press the catch in the direction of the arrow (1). The battery jumps out of the holder slightly. ► Remove the battery (2). ► Push the new lithium battery of the identical type into the holder (3) and press it down until it engages. Fujitsu...
► Replace the casing cover on the device and push it backwards. ► Secure the casing cover with the two screws on the rear of the device. Make sure that the cables are not trapped between the casing and the components. ► Connect all the cables removed before. Fujitsu...
Max. rated current: 1.2 A (40 W) or 1.5 A (65 W) Rated frequency: 50 - 60 Hz Only the following adapters with Limited Power Source may be used: • 40W: S26113-E578-V55-01 Model: ADP-40PH AD • 65W: S26113-E557-V55-03 Model: ADP-65JH AD Fujitsu...
DC IN 8 Device Ports 21 Device drivers, LAN 24 serial interface 23 LAN port 21 Device, LAN socket 8 opening 31 Line in 21 switching off 25 Line out 21 switching on 25 Line-out devices transporting 11 connecting 24 Fujitsu...
Page 67
PCIe slot 8 USB devices, Ports 7, 21 connecting 23 Power over Ethernet module, USB port 22 installing 52 USB port, removing 54 connecting devices 23 Power-on indicator 7 connecting keyboard 22 PS/2 keyboard port 8 connecting the mouse 22 Fujitsu...
Page 68
Index USB ports 8 User Documentation DVD 12 Vertical operating position 15 Fujitsu...