First Start-Up - Nokia 7710 User Manual

ReMX_UG.book Page 17 Tuesday, March 1, 2005 11:15 AM
before you can use the SIM card again. If the codes are
not supplied with the SIM card, contact the operator
whose SIM card is in your smartphone.
If the smartphone requests a lock code, enter the
code (displayed as *****) and tap OK. The lock code
protects your device against unauthorised use. The
factory setting for the lock code is 12345. Change the
code, and keep the new code secret and in a safe place
separate from your smartphone. The lock code can be
from 5 to 10 digits.
Note: Your smartphone has an
internal antenna. As with any other
radio transmitting smartphone, do
not touch the antenna
unnecessarily when the
smartphone is switched on.
Contact with the antenna affects
call quality and may cause the
smartphone to operate at a higher
power level than otherwise needed.
Avoiding contact with the antenna
area when operating the
smartphone optimises the antenna
performance and the battery life.
The picture shows how you should hold your smartphone
when talking on the phone. The antenna area is shown in
grey.

First start-up

When you start up your smartphone for the first time, you
are asked to calibrate the touch screen and define certain
settings. Based on the type of SIM card you use your
device may be able to automatically add the correct
settting for Web browsing and MMS.
All the settings can later be modified in the Control Panel
application or in relevant applications.
1 Upon start-up the smartphone performs a self-test.
After the self-test is complete, you are asked to
calibrate the touch screen. Follow the instructions on
the screen.
2 If the smartphone requests a PIN code,enter the code
(displayed as ****), and tap OK. A welcome screen
appears.
3 To have the time and date set automatically, select the
Auto-update: check box. Tap Finish. If you select the
Auto-update option and the service is available, the
smartphone needs to be restarted. If auto-update is
selected by default and the service is available,
(see step 6 below) dialog is displayed. Note that some
network operators may not support the
feature.
4 If Auto-update is not active or available, specify a
home city for the smartphone.
5
If Auto-update is not active set the time and date. If
you do not want to continue with the setup, tap Finish.
6
You can edit a variety of optional settings, such as
e-mail account settings or your personal details.
Settings
Auto-update
17