STEERING HEAD
EAS00680
REMOVING THE LOWER BRACKET
1. Stand the scooter on a level surface.
WARNING
_
Securely support the scooter so that there
is no danger of it falling over.
2. Remove:
• handlebar lower holder 1
• woodruff key 2
NOTE:
Remove the handlebar lower holder by loosen-
ing the upper steering ring nut 3 gradually.
3. Remove:
• upper steering ring nut 1
(with the ring nut wrench)
• lock washer 2
• center steering ring nut 3
• rubber washer
Ring nut wrench
90890-01268, YU-01268
4. Remove:
• lower steering ring nut 1
(with the ring nut wrench 2)
Ring nut wrench
90890-01268, YU-01268
WARNING
Securely support the lower bracket so that
there is no danger of it falling.
4 - 62
CHAS