Voice Message Waiting - Individual; Trunk Answer Any Station (Tas); Pad Lock - NEC Univerge SV8300 User Manual

1.
Voice Message Waiting – Individual
To set:
1. Lift the handset and receive dial tone.
2. Dial the Voice Message Waiting - Individual set
access code and receive feature dial tone.
3. Dial the desired station number and receive
service set tone for three seconds.
4. Record the message.
5. Restore the handset.
To cancel:
1. Lift the handset and receive dial tone.
2. Dial the Voice Message Waiting - Individual
cancel access code and receive feature dial tone.
3. Dial the desired station number and receive
service set tone.
4. Restore the handset.
To set while receiving ringback tone or busy tone
or conducting a voice call:
1. Dial 8 (or press the hookswitch and dial 8 for PB
telephone and Voice Call); receive service set
tone for three seconds.
2. Record the message.
3. Restore the handset.

Trunk Answer any Station (TAS)

This feature allows any station, other than one with
incoming restrictions, to answer incoming calls when
the system is in the night mode. When this feature is
activated, incoming exchange network calls will
activate a common alert signal at the customer
premises. By dialing a specified code, any station may
answer the call and then extend it to any other station
by means of the Call Transfer feature.
To answer a Trunk Answer Any Station (TAS) call:
1. The TAS signal sounds.
2. Go off-hook and receive dial tone.
3. Dial the specified TAS feature access code.
4. Connection to the incoming call is completed.

Pad Lock

This feature temporarily restricts telephones from
making unauthorized calls by dialing special access
code when station users are away from their seats.
To set Pad Lock:
1. Lift the handset and receive dial tone.
2. Dial the access code for Station Authorization
Code, and receive Service Set Tone if
programmed.
3. Enter Station Authorization Code.
4. If the code is right, Dial Tone will be heard. (If the
code is not right, Reorder Tone will be heard.)
5. Dial access code to set Room Cutoff.
6. Service Set Tone will be heard.
7. Restore handset.
24