Split Call Forwarding - Busy Line - NEC Univerge SV8300 User Manual

1.
Split Call Forwarding – Busy Line
This feature allows internal and external calls to a busy
extension to be rerouted to separate destinations.
Destinations may be an internal station, Attendant
Console, or voice mail. And according to the type of a
caller (Station/C.O. Line/Tie Line) or a call terminated
from internal office or via CCIS, Call Forwarding or Split
Call Forwarding can be selected.
To activate Split Call Forwarding, both Split Call
Forwarding and Call Forwarding settings are required.
For Call Forwarding settings, refer to the description of
Call Forwarding – Busy Line on page
To set Split Call Forwarding - Busy Line:
1. Lift the handset and receive dial tone.
2. Dial the Call Forwarding - Busy Line feature
access code and receive feature dial tone.
3. Dial destination number (0~9) and receive service
set tone.
4. Replace the handset.
To monitor Split Call Forwarding - Busy Line:
1. Lift the handset.
2. When Split Call Forwarding - Busy Line has been
set, special dial tone is heard if set by system
programming.
3. Replace the handset.
To cancel Split Call Forwarding - Busy Line:
1. Lift the handset and receive dial tone.
2. Dial Call Forwarding - Busy Line cancellation
code and receive service set tone.
3. Replace the handset.
9.
12
Number Destination
Number
Target station for Split Call Forwarding –
0
Busy Line (Block 0)
Target station for Split Call Forwarding –
1
Busy Line (Block 1)
Target station for Split Call Forwarding –
2
Busy Line (Block 2)
Target station for Split Call Forwarding –
3
Busy Line (Block 3)
Target station for Split Call Forwarding –
4
Busy Line (Block 4)
Target station for Split Call Forwarding –
5
Busy Line (Block 5)
Target station for Split Call Forwarding –
6
Busy Line (Block 6)
Target station for Split Call Forwarding –
7
Busy Line (Block 7)
8 Target station for Call Forwarding – Busy Line
9 Station Speed Dialing
Destination