Optional Header Compression Configuration - Cisco ASR 5000 Series Administration Manual

HSGW Configuration
Use the following example to modify the default subscriber configuration in the AAA context:
Notes:
The IMS Auth Service is also crested and configured in the AAA context.
A RoHC profile name is optional and dependant on if RoHC is being configured for this HSGW. RoHC profiles
are configured through the Global Configuration Mode. Refer to the
Configuration
detailed information about RoHC profile commands.
Configuring QCI-QoS Mapping
Use the following example to create and map QCI values to enforceable QoS parameters:
Notes:
QCI values 1 through 9 are standard values and are defined in 3GPP TS 23.203. Values 10 through 32 can be
configured for non-standard use.
The configuration example shown above only shows one keyword example. Refer to the QCI - QOS Mapping
Configuration Mode Commands chapter in the Command Line Interface Reference for more information on
the

Optional Header Compression Configuration

Use the following example to configure a Robust Header Compression profile:
OL-22984-01
section for the RoHC profile configuration and the Command Line Interface Reference for
command and other supported keywords.
Configuring the System to Perform as a Standalone HSGW ▀
Optional Header Compression
Cisco ASR 5000 Series HRPD Serving Gateway Administration Guide ▄