Video - Toshiba D-VR660KU Owner's Manual

Video

OPEN/ INPUT
CLOSE SELECT
.@/: ABC
GHI JKL
PQRS TUV
SPACE
DTV/TV SETUP SETUP
DISC MENU
ENTER ENTER
CLEAR
INSTANT
SKIP
REV PLAY
SKIP STOP STOP
PAUSE
DUBBING
REPEAT TIMER SET
Press [STOP C] if you are playing back a disc.
Press [SETUP] and use [K / L] to
1
select "General Setting", then press
[ENTER].
Use [K / L] to select "Video", then
2
press [ENTER].
Use [K / L] to select a desired item,
3
then press [ENTER].
1
Progressive
2
TV Aspect
3
Select Video
Submenu will appear.
4
Refer 1 to 2 on this page and set
the selected item.
3 ,
• For refer to "Connection to an External
Device" on page 54.
5
When you finish with the setting,
press [SETUP] to exit.
GENERAL SETTING
HDMI
DEF
CH
MNO
WXYZ
TIMER
PROG.
DISPLAY AUDIO
TOP MENU
RETURN
1.3x/0.8x
TIME SLIP
PLAY
FWD
SKIP
VCR DVD
REC MODE REC
SEARCH ZOOM
1
Progressive (Default : OFF)
This unit is compatible with the progressive scan system.
The feature provides you with the higher definition
images than the traditional output system does. To utilize
this feature, you must set progressive scan mode to "ON".
1) Use [K / L] to select "ON", then press [ENTER].
General Setting
Playback
Display Progressive
Video TV Aspect
Progressive
Recording Select Video
ON
Clock
OFF
Channel
DivX
2) Use [{ / B] to select "Yes", then press [ENTER].
General Setting
Playback
Activating progressive scan:
Display Progressive
Check your TV has progressive scan
Video TV Aspect
Progressive
and connect with component video cable.
Rcording Select Video
ON
Clock
OFF
Channel
NOTE :
DivX
If there is no picture or picture is
HDMI
distorted after selecting "Yes",
R eset All
Wait about 15 seconds for auto recovery.
Activate? Yes
3) Use [K / L] to select "Yes" within 15 seconds, then
press [ENTER].
Your setting will be activated.
Note
• If your TV is compatible with progressive scan (480p), you
are recommended to use the HDMI or component video
cable (commercially available) to connect this unit to the
TV. (Refer to "Method 2" on page 22 or page 23.) If not, use
the RCA video cable and set the progressive scan to "OFF".
• If the Progressive Scan image is distorted, you can
cancel Progressive Scan by pressing and holding
[SETUP] for more than 3 seconds during DVD
playback. The "Progressive" setting will be "OFF".
• When selecting "No" or not pressing any buttons on
the unit or remote control within 15 seconds at step 3,
progressive scan remains to be "OFF" (interlace scan).
2
TV Aspect (Default: 4:3 Letter Box)
You can select the TV aspect ratio to match the formats of
what you are playing back with the unit and your TV
screen (4:3 standard or 16:9 widescreen TV).
Use [K / L] to select a desired option, then press [ENTER].
General Setting
Playback
Display Progressive
Video TV Aspect
TV Aspect
Recording Select Video
4:3 Letter Box
Clock
4:3 Pan & Scan
Channel
16:9 Wide
DivX
HDMI
If you have a standard TV:
Select "4:3 Letter Box", so that black bars appear on the
top and bottom of the TV screen when playing back a
wide-screen picture. Select "4:3 Pan & Scan" for a full
height picture with both sides trimmed when playing
back wide-screen picture.
If you have a widescreen TV:
Select "16:9 Wide".
No
EN 105