Items Relating To Remote Interface (Nos. 201 To - Sony SRW-5800 Operation Manual

Items Relating to Remote Interface (Nos. 201 to ...)

Item number Item
201 REMOTE 9-PIN
202 REMOTE 50-PIN
203 PARALLEL
RUNNING
204 VIDEO REMOTE
CONTROL SELECT
Sub item
1 IMAGE
ENHANCER
2 D2 SETUP
205 REMOTE
NETWORK1
211 REMOTE 1 PORT
212 MONITOR
SELECTION FOR
VTR TO VTR EDIT
Setting Function
[off] When this is set to "on", this unit is controlled from the
on device connected to the REMOTE 1-IN(9P) or REMOTE 1-
I/O(9P) connectors.
Note
When this unit is controlled by a device connected to the
REMOTE 1-IN(9P) or REMOTE 2 PARALLEL I/O(50P)
connector, the editing control buttons and all of the tape
transport buttons except STOP and EJECT are disabled. It
is also possible to make a setting so that all of the buttons
are disabled.
For details, see item 008.
[off]
When this is set to "on", this unit is controlled from the
on device connected to the REMOTE 2 PARALLEL I/O(50P)
connector.
[disable]
Selects whether two or more VTRs can be operated
enable synchronized.
disable: Synchronized operation is not carried out.
enable: Synchronized operation is enabled.
Note
For synchronized operation to be possible, this item must
be set to "enable" on all of the connected VTRs.
Make settings for control from HKDV-900/503 via the
VIDEO CONTROL (9P) connector.
U&D Select whether to control the up-converter or down-
UP converter whether controlling the image enhancer.
[DOWN] U&D: Control both the up-converter and down-converter.
UP: Control the up-converter.
DOWN: Control the down-converter.
BLACK Select the menu item to be controlled by the SETUP dial on
[SETUP] the HKDV-900/503 with the D2 button pressed.
BLACK: Control menu item 743.
SETUP: Control menu item 762.
For details, see items 743 and 762.
Note
After changing the setting for this item, power off this unit or
HKDV-900/503 and power it on again.
on Specifies whether or not control from a network is possible.
[off] on: Allows control from a network.
off: Does not allow remote control from a network.
Specifies whether to use one or both of the REMOTE 1-
I & I/O
IN(9P) and REMOTE 1-I/O(9P) connectors on the
IN
connector panel.
I/O
I & I/O: Use both the REMOTE 1-IN(9P) connector and the
IN: Use only the REMOTE 1-IN(9P) connector.
I/O: Use only the REMOTE 1- I/O(9P) connector.
[MAN] For editing with two SRW-5000/5500 units, specifies
AUTO whether the recorder is forcibly switched to E-E mode when
the PLAYER button is pressed.
MAN: The recorder is not forcibly switched to E-E mode.
AUTO: The recorder is forcibly switched to E-E mode,
REMOTE 1-I/O(9P) connector.
allowing you to monitor the player-side video.
165
Menu List