Taking Out Discs - Epson PP-50BD User Manual

Taking Out Discs

Follow the steps below to take out the published/read discs from the stackers.
1. Open the disc cover.
2. Take out the stacker only when the output stacker is stacker 2.
3. Take out the published/read discs from the stacker. The output stacker differs
according to the publish mode. Refer to the following table.
Output stacker
Stacker 2
Stacker 3
Stacker 2
Note:
❏ Once the output stacker becomes full, the job is paused. The job is resumed automatically if you
take out the published discs from the stacker.
❏ Be sure to let printed discs dry completely before using them or touching the printed surface.
Allow Epson specified discs to dry for at least 1 hour and other types of discs for at least 24
hours.
❏ If the print position is misaligned, adjust it using the printer driver. For details, refer to the printer
driver Help.
❏ If the ink smears, adjust the color saturation. For details, refer to the printer driver Help.
Publish mode
Standard mode
Read Back mode
Standard mode
Low-volume mode
Stacker 3
Number of discs
Up to about 50 discs
Up to about 20 discs
Publishing Discs
67