Taking Out Discs - Epson PP-100AP User Manual

Taking Out Discs

Follow the steps below to take out the published discs from the stackers.
Caution:
c
If you select stacker 4 as the output stacker in Standard mode or External Output mode,
❏ Do not yank stacker 4 when pulling it out to remove published discs.
❏ Do not pull out stacker 4 when the stacker 4 LED is flashing fast. Discs may be damaged.
1. Open the disc cover (only for output to stacker 2 or 3), and take out the stacker.
2. Take out the published discs from the stacker. The output stacker differs according to
the publish mode. Refer to the following table.
Output stacker
Stacker 2
Stacker 3
Stacker 4
Stacker 2
Note:
❏ Be sure to let discs dry completely before using them or touching the printed surface. Allow
Epson specified discs to dry for at least 1 hour and other types of discs for at least 24 hours.
❏ If the print position is misaligned, adjust it using the printer driver. For details, refer to the printer
driver Help.
Publish mode
Standard mode
Batch mode
Standard mode
External Output mode
Batch mode
Standard mode
External Output mode
Stacker 3
Number of discs
Up to about 50 discs
Up to about 50 discs
Up to about 5 discs
Stacker 4
Publishing Discs
59