Wash Cycle Chart Example - GE Profile WPGT9150 Technical Service Manual

User Selection of Cycle
Dry Load Sensing
Water Fill
Wet Load Sensing
Wash Process
Basket Wash
Centrifusion Wash
Infusor Wash
Spin and Drain*
Spray Rinse
Spin and Drain
Final Rinse
Spin and Drain

Wash Cycle Chart Example

Adjust Water Temp
Adjust Water Fill (only if needed)
*Spin Information
Maximum spin speeds will vary depending on the cycle:
Hand-wash
Delicate
Normal
Heavy
• The Delicate cycle ramps up to maximum speed by fi rst
spinning to 400 rpm then pausing, then to 500 rpm.
• Normal and Heavy cycles ramp up to maximum speed
by fi rst spinning to 400 rpm and pausing, then to 700
rpm and pausing, then to 1000 rpm.
– 11 –
500 rpm
600 rpm
1000 rpm
1000 rpm