30
SuperSign Elite-c
Viewing and Changing the Command
Console Tab
Click the Command Console tab and select a monitor in Monitor View. Enter a command in the
Command Console tab and click the Send button to view the response for the command in the
Response window.
NOTE
y If the monitor is connected to Network, the commands for Power On does not work.
e.g. ka 01 01, mc 01 08, mc 01 C4.
Viewing and Changing the White Balance
Tab Settings
Click the White Balance tab, select a monitor in Monitor View, and then click the Read button to
view the current information of the monitor. Click the drop down button on the right-hand side of
each piece of information to change the settings. You can view or change the settings for red gain,
red offset, green gain, green offset, blue gain, and blue offset depending on the support availability
of each model.