Extsw Setup - Kenwood DNX8120 Instruction Manual

EXTSW Setup
Setting up power specification of the external
device for which the power is controlled from
this unit.
D
Display the EXT SW SETUP screen
Touch '.~!i;jji"W'iiAtl'l:El~jiiiW"iI·
• • • • . in the "SETUP
Menu" screen (page 64).
o
Perform EXT SW Setup
Setting EXT SW Cantrall (EXT SW1)
EXT SW SETUP
W"-~r
[jj]
SW Name
:::
EXT SWl
nlet
[g]
OutPlJl Pattern
.:~
Pulse
r-~"
[jj]
Pulse Set
01
~
....
10
~
.#
~
ry [gJr:;:.r
'T
"
II]
Sets the name of the external device. See
<Character Entry> (page 50) for information
on how to enter the name.
11]
Sets the power signal output mode.
([2]
EXT SW1: Pulse, EXT SW2: Level)
Pulse: Generates a single power signal
pulse.
Level: Continues output of high power
signal.
Sets to turn output on/off each time the
button on the EXT SW Control screen is
pressed.
IJJ
Sets the Pulse signal output time.
Outputs SOOms when "1" is set Increases
by 200ms with each step. Up to 100 steps
can be set
[I]
Returns to the original screen.
Setting EXT SW Control 2 (EXT SW2)
The setup method is the same as "EXT SW1 ".
English 91