Step 1: Preparing The Speakers; Assembling The Speakers - Panasonic SC-BTT755 Operating Instructions Manual

SCBTT755_350EBGN_VQT2W23.book 12 ページ ２０１０年６月１８日 金曜日 午後４時５８分

STEP 1: Preparing the speakers

Caution
≥ The main unit and supplied speakers are to be used only as indicated in this setup. Failure to do so may
lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified
service person if damage has occurred or if you experience a sudden change in performance.
≥ Do not attempt to attach these speakers to walls using methods other than those described in this manual.
≥ Do not touch the front netted area of the speakers. Hold by the sides.

Assembling the speakers

[BTT755]
Caution
≥ Do not stand on the base. Be cautious when children are
near.
≥ When carrying speakers, hold the stand and base parts.
2 Front speakers
2 Surround speakers
1
2
VQT2W23
12
4 Stands (with cables)
Back of the base
Screw B
Leave about 80 mm
Preparation
≥ To prevent damage or scratches, lay down a soft cloth and
perform assembly on it.
≥ For wall mount, refer to page 44.
≥ Keep the screws out of reach of children to prevent
swallowing.
4 Bases
Pull the cable
straight along the
line and slide into
the groove.
Screw A
Insert the wire fully.
r: White
s: Blue line
Push!
Press into the groove.
Tighten securely.
8 Screws A 4 Screws B
A B
Tighten
2
securely.
1