Table of Contents
Advertisement
SCBTT755_350EBGN_VQT2W23.book 44 ページ ２０１０年６月１８日 金曜日 午後４時５８分
Speaker installation
Optional speaker settings
option
Attaching to a wall
You can attach all of the speakers (except subwoofer) to a
wall.
≥ The wall or pillar on which the speakers are to be attached
should be capable of supporting 10 kg per screw. Consult a
qualified building contractor when attaching the speakers to
a wall. Improper attachment may result in damage to the wall
and speakers.
≥ Do not attempt to attach these speakers to walls using
methods other than those described in this manual.
1
Drive a screw (not supplied) into the wall.
2
Fit the speaker securely onto the screw(s)
with the hole(s).
e.g., [BTT755] Front speaker
DO NOT
≥ In this position, the speaker
will likely fall if moved to the
left or right.
[BTT755]: Front speaker, Surround speaker
Attach to a wall without the base and the stand.
[BTT350]:
Front speaker, Surround speaker
F 97 mm
G 210 mm to 212 mm
H 26 mm
VQT2W23
44
A At least 30 mm
B ‰ 4.0 mm
C ‰ 7.0 mm to 9.4 mm
D Wall or pillar
E 5.5 mm to 7.5 mm
DO
≥ Move the speaker so
that the screw is in this
position.
[BTT755]: Centre speaker
[BTT350]: Centre speaker
I 18.8 mm
J 117 mm
K 209 mm to 211 mm
L 97 mm
M 17 mm
N 99 mm to 101 mm
∫ To avoid speaker dropping
[BTT755]: Front speaker, Centre speaker, Surround speaker
A String (not supplied)
B Screw eye (not supplied)
C Less than 10 cm
D Rear of the speaker
≥ Consult a qualified building contractor to avoid damage to
the wall or speakers.
≥ Use a string of less than ‰ 2.0 mm, which is capable of
supporting over 10 kg.
- Quick Links:
- Connection to a Tv
- Troubleshooting Guide
Hide quick links:
Advertisement
Table of Contents
