Table of Contents
Advertisement
Vertically
1. Pull out the Handset retaining clip from the slot and turn it around. Then push it back
so that the handset will not fall down when FWT is placed vertically.
2. According to the distance between the two hooks (7.7 cm), hammer two nails into the
wall with 3 mm end left out.
7.7cm
3. Snap the hooks to the nails.
Validating
After installing the FWT, you can make a call to check whether it is correctly installed.
1. Press and hold
socket, the
2. Lift the handset. In the standby mode, the signal strength icon
3. If you are able to make a call, it indicates that the FWT is installed correctly.
to power on your FWT. After connecting the FWT to the power
icon appears, indicating that the FWT is powered normally.
appears normally.
17
Hide quick links:
Advertisement
Table of Contents
