Making Prints Using The Stack Bypass - Canon imageRunner 6020 Reference Manual Reference Manual

All in one printer
Hide thumbs Also See for imageRunner 6020:
Table of Contents

Advertisement

Making Prints Using the Stack Bypass

If you are making prints on transparencies or nonstandard size paper stock, load
the paper stock into the stack bypass.
IMPORTANT
Note the following points when using the stack bypass:
- Copy quantity: 1 to about 50 sheets (stack about 3/16" (5 mm) high)
- Paper size: 4" x 5 7/8" to 11 5/8" x 17" (100 mm x 148 mm to 297 mm x 432 mm)
- Paper weight: 17 lb bond to 110 lb index (64 g/m
- Paper which has been rolled or curled must be straightened out prior to use, (Allowable
Curl amount: less than 3/8" (10 mm)). There are some types of paper stock which may
meet the above specifications, but cannot be fed into the stack bypass.
Load STMT paper horizontally into the stack bypass.
Do not load different size paper at the same time.
If you select [Free Size] for copying, you cannot use the Auto Copy Ratio, Entire Image,
Finisher, 1 2-Sided, 2 2-Sided, Book 2-Sided, Two-Page Separation, Cover/Sheet
Insertion, Shift, Booklet, Transparency Interleaving, Image Combination, Image
Separation, Image Repeat, Form Composition, or Page Numbering modes. (See
Chapter 1, "Basic Copying," in the Copying Guide or Chapter 2, "Additional Copy
Functions," in the Copying Guide.)
If you select [Free Size] for printing documents stored in a Users Inbox, you cannot use
the Finisher, Two-Sided Printing, Cover/Sheet Insertion, Cover/Job Separator, Booklet,
Form Composition, or Page Numbering modes. (See Chapter 4, "Using/Arranging
Documents Stored in an Inbox," in the Mail Box Guide.)
NOTE
If you want to copy or scan the following types of originals, you cannot use Automatic
Paper Selection. Use Manual Paper Selection instead.
- Highly transparent originals, such as transparencies
- Originals with an extremely dark background
s Standard Size
You can select standard inch paper, or A or B series paper.
s Free Size
You can load nonstandard size (4" x 5 7/8" to 11 5/8" x 17" (100 mm x 148 mm to 297 mm
x 432 mm)) paper.
2
2
to 200 g/m
)

Making Prints Using the Stack Bypass

1
1-63

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imagerunner 6020iImagerunner 5020Imagerunner 5020i

Table of Contents