Using Your Tuner Card - Asus TV Tuner Card User Manual

2. Hardware Setup
Using Your TV Tuner Card
There are three general steps in using or setting-up your TV Tuner Card.
Step 1 Disconnect the CATV system or antenna from your TV system.
Step 2 Reconnect the CATV system or antenna to your TV Tuner Card.
Step 3 Connect the included and other accessories to your TV Tuner Card.
CATV/Home Antenna Connections
There are various types of cable TV (CATV) and antenna connections. Each type
requires a different method of connection.
NOTE Consult your dealer for the type of adaptor, splitter, A/B switch or combiner
that may be required when setting up your TV Tuner Card.
Your TV Tuner Card is capable of receiving up to 100 channels. If you do not have
a CATV system, you may use an indoor or outdoor antenna that carries only VHF
(channels 2–13), only UHF (channels 14–69), or VHF and UHF channels to connect
to your TV Tuner Card.
Your CATV sytem or antenna may be connected in either of the following two ways:
direct to the TV or through a VCR system.
Connection Through a TV System
Connection Through a VCR System
To start using your TV Tuner Card, follow the steps and sketch on the following
pages to connect a CATV system or home antenna to your TV Tuner Card.
ASUS TV Tuner Card User's Manual
CATV
CATV
13