Getting Started - Asus TV Tuner Card User Manual

Getting Started

The following steps will help you get your ASUS TV Tuner Card connected and
working quickly and assume that your computer is shut down and turned off.
1 Unpack your ASUS TV Tuner Card pagkage.
Shown here are the TV tuner card and accessories.
ASUS TV tuner card
Cables
(1) Video-in cable for connection to video camera or camcorder
(2) Audio cable for connection to sound card
Software
(1) ASUS installation driver CD
(2) ASUS VideoSecurity utility
(3) ASUSDVD XP utility
(4) CyberLink
(5) CyberLink
(6) CyberLink
Remote control with transmitter, receiver and batteries
ASUS TV Tuner Card user's manual
2 Connect cables and other accessories.
• Details for connecting a cable TV system and home antenna to your tuner starts
on page 13.
• Details for connecting other devices to your tuner card are on page 15.
3 Install batteries in remote control.
• Details are on page 17.
4 Start your computer.
5 Install the Device drivers.
• Details for installing the software to run your tuner card are on page 23.
6 Install the DirectX.
• Details for installing the software to run your tuner card are on page 31.
7 Installing software.
• Details for installing the software to run your tuner card are on page 34.
8 Using software.
• Details for using the software to run your tuner card are on page 39.
8
I. Introduction
®
PowerVCR II bundled
®
PowerDirector bundled
®
Medi@Show bundled
ASUS TV Tuner Card User's Manual