1-5. UTX-P1
1-5-1. Disassembly
Upper sub assembly
Four screws
P2 x 6
Four screws
P2 x 6
Case
Case
MB-1094 board
Screw
P1.7 x 6
*Remove the
solders.
Three screws
B2 x 6
1-14
Battery
case
Press and hold the notch, and pull up the upper sub assembly.
XLA connector
*Remove the
solders.
Two screws
P2 x 6
MB-1094
Three screws
board
B1.7 x 8
Upper sub assembly
Notch
Battery case
Coil spring
XLA connector
Connector holder
Screw
K2 x 5
Remove the solder, and disconnect the harness from
the XLA connector terminal.
Two screws
P2 x 6
Two screws
P2 x 6
Screw
P1.7 x 3
Locking
Lower spring
Battery spring (+)
Battery spring (_) L
Battery spring (_) R
Battery spring (+)
UWP Series