Motorola Symbol CS3000 Series Product Reference Manual page 38

1 - 24 Symbol CS3000 Series Scanner Product Reference Guide
Config.ini File Content (Continued)
Table 1-1
Parameter
ScanParam
Sleep
BTSleep
ButtonPlus
ButtonMinus
ButtonBT
WakeUpLED
LEDBlue
LEDGreen
LEDRed
LEDAmber
CodeID
ScanLED
Values
Variable Any scan engine parameter. Multiple
entries are allowed. Sent after reset or
when engine is powered.
For example:
ScanParam=0xf0,0x00,0x01
ScanParam=0xee,0x01
ScanParam=0x38,0x00
Integer Time in seconds before the scanner enters
sleep mode when no activity is detected.
Integer Time in seconds before the scanner enters
sleep mode while paired to another
Bluetooth device when no activity is
detected.
Enabled Enable or disable the Plus button.
Disabled
Enabled Enable or disable the Minus button.
Disabled
Enabled Enable or disable the BT button.
Disabled
Enabled Enable or disable the wake-up LEDs.
Disabled
Enabled Enable or disable the blue LED for normal
Disabled operation and wake up.
Enabled Enable or disable the green LED for
Disabled normal operation and wake up
Enabled Enable or disable the red LED for normal
Disabled operation and wake up.
Enabled Enable or disable the amber LED for
Disabled normal operation and wake up.
Enabled Enable or disable saving CodeID in the
Disabled scanned bar codes file. See
IDs on page
Enabled Enable or disable the LEDs that illuminate
Disabled while the laser scanner is active.
Description
Code Type
B-1.
Default
<none>
120 (2 minutes)
600 (10 minutes)
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled