Sony PVM-2541 Operating Instructions Manual page 11

When the menu is displayed, turn the control to select
a menu item or setting value, and then press the
control to confirm the setting.
To light up the characters that represent the
names of the buttons
When the menu is not displayed, press the menu
selection control. Press it again to turn off the lights.
To display the signal format
When the menu is not displayed, press the menu
selection control for more than two seconds.
RETURN button
When the menu is displayed, press the button to reset
the value of an item to the previous value (except
some items).
To display the names of functions assigned to the
function buttons
When the menu is not displayed, press RETURN.
The names of the function selected in FUNCTION
BUTTON SETTING of the USER CONFIG menu
appear in the lower right of the screen.
MENU button
Press to display the on-screen menu.
Press again to clear the menu.
g 1 (standby) switch and indicator
Press to turn on the power when this unit is in standby
mode. The indicator lights in green. Press the switch
again to set the monitor in standby mode. The indicator
goes out. When fan error occurs, the indicator blinks in
green and amber alternately.
Location and Function of Parts and Controls
11