Table of Contents
Advertisement
5
Removal and replacement
procedures
Tablet component replacement procedures
CAUTION:
service provider. Accessing these parts can damage the tablet and void the warranty.
This chapter provides removal and replacement procedures for authorized service provider only parts.
There are as many as 13 screws that must be removed, replaced, and/or loosened when servicing the
tablet. Make special note of each screw size and location during removal and replacement.
Back cover
Description
Back cover (includes internal shielding)
10.1-in TouchScreen display panel assembly
NOTE:
The display panel assembly spare part kit does not included the display panel cable. The
display panel cable is included in the Cable Kit, spare part number 746637-001.
Before disassembling the tablet, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
Remove the back cover:
12
Chapter 5 Removal and replacement procedures
Tablet components described in this chapter should only be accessed by an authorized
Spare part number
739004-001
739005-001
Advertisement
Table of Contents
