Speakers - HP 10 Maintenance And Service Manual

Table of Contents

Advertisement

6.
Remove the battery (3) by sliding it forward.
Reverse this procedure to install the battery.

Speakers

Description
Speaker Kit (includes left and right speakers and cables)
Before removing the speakers, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
5.
Disconnect the speaker cable from the system board (see
Remove the speakers:
1.
Disconnect the speaker cable (1) from the system board.
2.
Release the speaker cables (2) from the clips built into the display panel assembly.
Back cover on page
12).
Spare part number
739007-001
Battery on page
14).
Speakers
15

Advertisement

Table of Contents
loading

Table of Contents