Audio Set Up; Displaying The Car Type Set Up Screen; Displaying The Speaker Set Up Screen; Displaying The Channel Level Screen - Kenwood KVT-935DVD Instruction Manual

Television with dvd receiver
Hide thumbs Also See for KVT-935DVD:
Table of Contents

Advertisement

Setup Menu

Audio Set Up

You can set up the car type and speaker system you use together with this unit.
Displaying the Car Type Set Up
screen
If your vehicle type is selected, the Digital Time
Alignment is set automatically (for timing adjustment of
sound output for each channel) to have the highest
surround effects.
Audio Set Up
Car Type Set Up screen
MENU
DTA
Preset
4
7
1
3
2
5
5
1
46 English
1 Adjusts the volume.
2 Returns to the Control screen of the previous
source.
3 Calls the Sound Effects Menu. (see page 68)
4 Calls the Setup Menu.
5 Sets up the car type you use together with this unit.
6 Displays the DTA (Digital Time Alignment) Setup
screen. (see page 50)
You can adjust the digital time alignment that was
set automatically when you selected the car type.
6
1
7 Call the DTA screen setup from memory.
8 Displays the Speaker Set Up screen.
If
Audio Set Up
is not shown, touch
or
to display it.
Next
1
8
Displaying the Speaker Set Up
screen
When the speaker type and size are set, the speaker
crossover network and equalizer curve are set
automatically.
Speaker Set Up screen
9
Prev.
15
Displaying the Channel Level
screen
You can set the volume at each setup position.
Channel Level screen
19
9 Selects a speaker to be set.
(see <Speaker Set Up>, page 48)
p Selects a speaker type.
(see <Speaker Set Up>, page 48)
q Stores your setup in memory.
(see <Speaker Setup Memory>, page 51)
w Displays the Speaker Crossover Setup screen.
(See <Crossover Network Setup>, page 51)
You can adjust the crossover setup that was set
automatically when you selected the speaker type.
11
12
e Set the use or no use of tweeter.
(see <Speaker Set Up>, page 48)
r Displays the Channel Level Setup screen.
t Displays the Car Type Set Up screen.
10
10
13
Use
14
y Selects a speaker to be set.
(see <Channel Level>, page 49)
u Sets the speaker volume.
(see <Channel Level>, page 49)
i Starts or stops test signal tone output for setup
check.
o Displays to the Speaker Set Up screen.
18
16
Your setup on the <Sound Effects Menu> is
adjusted automatically to get the best sound
effects according to the car type and speaker you
+1
+10 dB
have set on the <Audio Set Up> (see page 46). We
17
17
recommend you to complete the <Audio Set Up>
first, then set up the <Sound Effects Menu>.
You can fine-adjust the automatic set value by
<DTA Setup> (see page 50), <Crossover Network
Setup> (see page 51), or <Parametric Equalizer>
(see page 73).
English 47

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kvt-945dvdKvt-965dvd

Table of Contents