Manual Recording; Checking Input; Recording; Manual Audio Control - Philips DVDR1000 Instructions For Use Manual

Manual recording

Checking input

Normally, the DVD recorder displays the contents of
the disc on screen. Use the TUNER key in order to
switch to the internal tuner, or whichever other source
is selected, if you want to check the input before starting
a recording. Press TUNER again to go back to disc
mode.

Recording

Insert a recordable DVD+RW disc.
Use CHANNEL 3 or CHANNEL 4 (on the
recorder) or P+, P- or the digit keys 0-9 (on the
remote control) to select the programme number
(programme name) from which you wish to record.
When a TV channel transmits a channel name,
it will be shown on the display.
a P
MUTE
T/C TUNER
The following programme numbers are provided for
recording from external sources:
'EXT1' : TV set via
'EXT2' : for recording from external sources via
socket
2
SCART
'EXT3' : rear S-video
'EXT4' : rear CVBS
'CAM1' : front S-video
'CAM2' : front CVBS
'CAM3' : front DV.
Press RECORD (on the recorder) or REC/OTR
(on the remote control).
is shown on the display.
RECORD
Press 9 STOP to stop recording.
The Index Picture Screen is updated.
MENU UPDATE is shown on the display.
32 RECORDING
TV/DVD STANDBY
REC/OTR
STOP PLAY
REVERSE FORWARD
PAUSE SLOW
PREVIOUS NEXT
socket
SCART 1
After a short recording on a new disc, a few minutes
will be needed to complete the formatting of the
disc.
Direct record
Make sure 'Direct record' is switched On.
(See record settings).
On the TV set, select the programme number you
want make the recording from.
Press RECORD (on recorder) or REC/OTR
(on remote control) with the DVD recorder
switched to standby.
Notes:
- Don't select another programme number on your TV set,
until 'WAIT' on the display of your DVD recorder disappears.
This can take up to one minute.
- When 'NOTV' appears on the display, the programme
number could not be found. The DVD recorder switches off
automatically.
- If your loudspeakers are connected (via an amplifier/
receiver) to your DVD recorder, the sound will be delayed
relative to the TV picture when recording directly from the TV
set.

Manual audio control

You can control the audio recording level of your DVD
recorder manually.
In tuner mode, press AUTO/MAN REC VOLUME
on the DVD recorder.
The display will show the current audio level and
appears.
MANUAL
TITLE CHAPTER
DVD RW SP
-40 -30 -20 -10 0
OVER
MANUAL
Adjust the recording level with MANUAL 3 or 4
on the DVD recorder, so that the '0 dB' mark lights
up during the loudest parts of the recording.
You can switch back to automatic audio level control
by pressing AUTO/MAN REC VOLUME again.
The display will show the current disc position
and disappears.
MANUAL
Note:
When DV input is selected, manual volume control is disabled.
TIME REMAIN CHANNEL
RECORD
-40 -30 -20 -10 0
OVER
STEREO