Pal/Ntsc Settings - Philips DVD Video Player Manual

PAL/NTSC settings

You can switch the PAL/NTSC setting of the player to match the video
signal of your TV in order to allow the On Screen Display to appear in
the correct format on your screen.
To change the NTSC/PAL setting, turn the player OFF.
Simultaneously press the STOP 9 and DNM buttons while you
turn the payer ON.
After or appears on the display panel of the player,
PAL NTSC
release the STOP 9 and DNM buttons.
The or that appears on the display panel is the current
PAL NTSC
setting of the player.
You can change the current setting by pressing DNM within
5 seconds.
PREPARATION 21