Fan Operation - Hitachi RAS-10EH1 Instruction Manual

FAN OPERATION

You can use the device simply as an air circulator. Use this function to dry the interior of the indoor unit
at the end of summer.
FAN SPEED (AUTO)
For the heating operation
For the cooling operation
06L176_RAS-10_14EH1_En
1
Press the FUNCTION selector so that the display indicates
(FAN).
Press the
2
(HI)
(MED)
(LOW)
Press the
START
beep.
STOP
Press the button again to stop operation.
... When the AUTO fan speed mode is set in the cooling/heating operation:
• The fan speed will automatically change according to the temperature of
discharged air.
• As room temperature reaches the preset temperature, a very light breeze
will blow.
• Operation starts in the "HI" mode to reach the preset temperature.
• As room temperature approaches the preset temperature, fan speed auto-
matically switches to "LOW".
11
(FAN SPEED) button.
: The strongest air blow.
: Quiet.
: More quiet.
(START/STOP) button. Fan operation starts with a
– 11 –
11/30/06, 3:38 PM