Panasonic Viera TH-L50DT60A Operating Instructions Manual page 22

3D Eyewear
Dimensions (W × H × D)
Mass
Usage temperature range
Materials
Use Panasonic 3D Eyewear supporting passive 3D system technology.
Note
VIERA Touch Pad Controller uses Bluetooth wireless technology.
Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate.
For the information of the open source software, refer to [eHELP] (Support > Licence).
When using the wall-hanging bracket
Choosing to wall mount the TV shall be done at the owner's risk. Always use a qualified installer to perform a TV wall
bracket installation. Incorrect fitting may cause equipment to fall, resulting in injury and product damage. Any such
damage will void your warranty.
Holes for wall-hanging bracket
installation
DT60 series
400 mm
400 mm
Rear of the TV
WT60 series
400 mm
400 mm
Rear of the TV
For the information of the trademarks, refer to [eHELP] (Support > Licence).
22
165 mm × 38 mm × 166 mm
Approx. 18
0 °C - 40 °C
Main body / Lens section: Resin
Depth of screw
minimum: 6 mm
maximum: 10 mm
Type of screw: M6
Screw for fixing the TV onto the wall-hanging bracket
(not supplied with the TV)
(View from the side)
Depth of screw
minimum: 7 mm
maximum: 11 mm
Type of screw: M6
Screw for fixing the TV onto the wall-hanging bracket
(not supplied with the TV)
(View from the side)